NOVELL FORUMS - GW7: Install-Setup-Admin http://forums.novell.com/ en Sat, 21 Nov 2009 13:59:37 GMT vBulletin 60 http://forums.novell.com/images/ca_serenity/misc/rss.jpg NOVELL FORUMS - GW7: Install-Setup-Admin http://forums.novell.com/ Install WebAccess http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/393292-install-webaccess.html Thu, 19 Nov 2009 15:49:52 GMT Hi, I have a GroupWise System 7.03 in 2 serves, first server have WebAccess (Agent + Aplication) and second have the System (GroupWise + agents +... Hi, I have a GroupWise System 7.03 in 2 serves, first server have WebAccess (Agent + Aplication) and second have the System (GroupWise + agents + gateways + etc..). The Operating System is a SUSE LINUX SP2, and the eDirectory is intalled in Netware 6.5.
I am migrating the WebAccess in a Virtual Machine with VMWare. But, I have problems when I am finish the instalation, the WebAccess is correctly installed and works, but the login falis because the server canīt connect with the eDirectory.

Could you please send me a tutorial or a guide with the instructions to install the webacces in a different server from the beginning.

Regards,
Marcos. ]]> GW7: Install-Setup-Admin mesayoni http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/393292-install-webaccess.html Disk Space freed after Cleanup is run http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/393073-disk-space-freed-after-cleanup-run.html Tue, 17 Nov 2009 22:59:45 GMT Just wondering if there is a report or information provided after the automated process runs during the night. Just trying to see how much space we... Just wondering if there is a report or information provided after the automated process runs during the night. Just trying to see how much space we are saving by forcing the clean process each night. Also wanting to know how much I could extend the day limit and not go over the disk space we have handy.

Thanks,

Matt ]]> GW7: Install-Setup-Admin medust http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/393073-disk-space-freed-after-cleanup-run.html Time for invites is wrong http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392990-time-invites-wrong.html Tue, 17 Nov 2009 14:10:32 GMT Hope I am in the correct forum. My issue is that when our employees receive an invite to a meeting the time that they see is 1 hour early in their... Hope I am in the correct forum.

My issue is that when our employees receive an invite to a meeting the time that they see is 1 hour early in their calendar. I can't seem to find what is wrong. Time change on the server seemed to go just fine as I even rebooted twice. My version of Groupwise is 7.0.2 I will gladly send any other info needed. I've been looking for days and I have run out of things to check. I hope someone can help me get this resolved soon. Thank you very much.

Tom ]]> GW7: Install-Setup-Admin tiacovone http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392990-time-invites-wrong.html Delete GW Object http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392750-delete-gw-object.html Mon, 16 Nov 2009 19:33:14 GMT Hi, I have a system with GW 7.0.3 and I Want to delete the GW Object MTA and WEBACCESS Gateway with console 1. It's not posible, because when i try to delete it, the console raise an alert saying that there was and error "modifying unsafe record (db03)". Help me please.

Regards,
Marcos.
Attached Files
File Type: pdf Error.pdf (33.5 KB)
]]> GW7: Install-Setup-Admin mesayoni http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392750-delete-gw-object.html Out of office reply going to everyone RUN button stupidity. http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392574-out-office-reply-going-everyone-run-button-stupidity.html Fri, 13 Nov 2009 18:19:10 GMT Every so often we get people who set up out of office reply in their client, and in addition to enabling the rule they hit the RUN button and it... Every so often we get people who set up out of office reply in their client, and in addition to enabling the rule they hit the RUN button and it replies to all the messages in their inbox.

Can that button be grayed out for all of my clients?
]]> GW7: Install-Setup-Admin Brian http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392574-out-office-reply-going-everyone-run-button-stupidity.html GW Mailbox stats showing 0 size for users in Post office http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392552-gw-mailbox-stats-showing-0-size-users-post-office.html Fri, 13 Nov 2009 14:56:31 GMT I am trying to run a report on our mailbox size for our PO. I ran a mailbox statistics in GWCheck and the output is somewhat baffling. Running it... I am trying to run a report on our mailbox size for our PO. I ran a mailbox statistics in GWCheck and the output is somewhat baffling. Running it though GWMBSIZE32 and it shows information for about 94 users - the rest either show up blank and reporting 0 size for inbox, outbox, wastebasket and size.

Here's some samples of the task log in the gwcheck.log: I am user yr3 and I know my mailbox is not empty. :) Can anyone shed some light???


here's the GW Check info for the run:
************************************************** *******************
Processing information for this run:
Path to PO = ab-cdefg-hi/data:\po_123
Post Office= PO_123
User = All
Action = Mailbox Statistics
Files = User
Verify = None
Box Limit = 500
Verbose = No
Upd DiskSpace= No
Output log = ab-cdefg-hi/data:\po_123\wpcsout\chk\4afd15e9.ckl


GWCHECK user options analysis:
- options are consistent.

***** POST OFFICE "PO_123" STATISTICS *****
************************************************** *******************
Uncorrectable conditions encountered:
CODE DESCRIPTION COUNT
---- -------------------------------------------------- -----
48 Orphaned QuickFinder index files (deleted)......... 14
Correctable conditions encountered:
CODE DESCRIPTION COUNT
---- -------------------------------------------------- -----
39 Unrecognized or invalid files in mail directories.. 59
65 QuickFinder temp files in index directories........ 9
66 GWCheck log files in log directory................. 2
************************************************** *******************

here are some samples:



===== TASK LOG - 9 (4afd16e2.ckl) ==============================================
================================================== ==============================

Checking user = ( ) 0 bytes, 01/01/70 00:00 ( [])
CONTENTS VERIFICATION/STATISTICS analysis of db ab-cdefg-hi/data:\po_123\ofuser\pu010a01.db
- 0 records found, last DRN = 0
- checking Data records
User stats: 0 InBox, 0 OutBox, 0 WasteBasket
Disk space management values: Size Limit - 0KB, Threshold - 0%
0 kbytes in use by user's mail
Disk space management values: Size Limit - 0KB, Threshold - 0%
0 kbytes in use by user's mail


PROCESSING COMPLETED- total processing time: 0:00:00


================================================== ==============================
===== TASK LOG - 4939 (4afd388d.ckl) ===========================================
================================================== ==============================

Checking user = (ypu) 0 bytes, 01/01/70 00:00 ( [])
CONTENTS VERIFICATION/STATISTICS analysis of db ab-cdefg-hi/data:\po_123\ofuser\userypu.db
- 0 records found, last DRN = 0
- checking Data records
User stats: 0 InBox, 0 OutBox, 0 WasteBasket
Disk space management values: Size Limit - 0KB, Threshold - 0%
0 kbytes in use by user's mail


PROCESSING COMPLETED- total processing time: 0:00:00

================================================== ==============================
===== TASK LOG - 4940 (4afd388f.ckl) ===========================================


Checking user = (yr3) 0 bytes, 01/01/70 00:00 ( [])
CONTENTS VERIFICATION/STATISTICS analysis of ab-cdefg-hi/data:\po_123\ofuser\useryr3.db
- 0 records found, last DRN = 0
- checking Data records
User stats: 0 InBox, 0 OutBox, 0 WasteBasket
Disk space management values: Size Limit - 0KB, Threshold - 0%
0 kbytes in use by user's mail


PROCESSING COMPLETED- total processing time: 0:00:00

================================================== ============================= ]]> GW7: Install-Setup-Admin squartec http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392552-gw-mailbox-stats-showing-0-size-users-post-office.html Shared Groups - ? http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392473-shared-groups.html Thu, 12 Nov 2009 20:22:08 GMT Hello, We run Groupwise 7.0.2 on Netware 6.5 SP7. Somehow users are having issues with their shared groups. When they share a group, the users who... Hello,

We run Groupwise 7.0.2 on Netware 6.5 SP7. Somehow users are having issues with their shared groups. When they share a group, the users who should receive them, don't see any members of the shared group. When they try to send mail to the group, groupwise says that some addresses are undeliverable or have been crossed out. The owner of the group sees the members. This does not change whether a read only or all rights are assigned when groups are shared.
Any thoughts?

Thanx.

J ]]> GW7: Install-Setup-Admin Jakub Gorecki http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392473-shared-groups.html GWCHECK for more than 1 user http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392429-gwcheck-more-than-1-user.html Thu, 12 Nov 2009 16:15:09 GMT Is it possible to run GWCheck.exe (Analyze/Fix) for more than 1 user at a time? Can we do this from the GUI (GWCheck.exe) or maybe from a command... Is it possible to run GWCheck.exe (Analyze/Fix) for more than 1 user at a time? Can we do this from the GUI (GWCheck.exe) or maybe from a command line?

We have found that the running Analyze/Fix from ConsoleIbw does not do as good job as from running the executable GWCheck.exe. We would like to run this on groups of persons without having to put in one user at a time.

We are running GroupWise 7.0.3 HP4 ]]> GW7: Install-Setup-Admin mountja http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392429-gwcheck-more-than-1-user.html GWCHeck Error 22 Miscellaneous check errors in database check http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392421-gwcheck-error-22-miscellaneous-check-errors-database-check.html Thu, 12 Nov 2009 15:14:35 GMT Hi!

GWCheck logged 2 uncorrectable conditions: "22 Miscellaneous check errors in
database check....... 2", that follows above.

How should I act to solve that?

Thankyou in advance.

FM



================================================== ==============================
===== TASK LOG - 193 (4afb0aa1.ckl)
============================================
================================================== ==============================
Checking message database msg192.db - 5158912 bytes, 11/11/09 18:02
- Current time 7:02 pm
STRUCTURAL VERIFICATION of database
TVOE_SA00/VOL1:\gwise\po\tvoe\ofmsg\msg192.db
Verifying data
Error 22- Database check error: Unknown Error 0xA46BFD20 (0xFD20)
Suggestion- Database file missing or invalid.
No direct recovery possible. Attempt to recover file from external backup.
If no backup exists, request explicit structural rebuild from Admin and the
database will be removed from Guardian database, to allow re-create.
However, all data previously contained in the database will be lost!


PROCESSING COMPLETED- total processing time: 0:00:03

================================================== ==============================
===== TASK LOG - 206 (4afb0aae.ckl)
============================================
================================================== ==============================
Checking message database msg205.db - 5926912 bytes, 11/11/09 18:44
- Current time 7:02 pm
STRUCTURAL VERIFICATION of database
TVOE_SA00/VOL1:\gwise\po\tvoe\ofmsg\msg205.db
Verifying data
Error 22- Database check error: Unknown Error 0x9F1F2C80 (0x2C80)
Suggestion- Database file missing or invalid.
No direct recovery possible. Attempt to recover file from external backup.
If no backup exists, request explicit structural rebuild from Admin and the
database will be removed from Guardian database, to allow re-create.
However, all data previously contained in the database will be lost!


PROCESSING COMPLETED- total processing time: 0:00:02



]]> GW7: Install-Setup-Admin Fabio Martins http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392421-gwcheck-error-22-miscellaneous-check-errors-database-check.html Migration to Windows http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392334-migration-windows.html Thu, 12 Nov 2009 03:05:48 GMT I need to plan a Groupwise migration to a Windows box in the very near future but am still fuzzy on some items even after some research. Articles... I need to plan a Groupwise migration to a Windows box in the very near future but am still fuzzy on some items even after some research.

Articles I have read make it sound relatively simple to move a GW system to a Windows server. A stopping of the agents on the Novell server then a copy to the Windows box of the entire GW directory structure and a reload of the agents but for a Windows platform obviously.

Some questions I have are whether the Windows server should be or needs to be named the same as the Netware server was. Seems to me it should be but not sure. I am also wondering about the document management piece which my client uses. The POA is mainly responsible for the DMS functionality I know but are there any considerations on the DMS side I need to make. Management of it is the biggest concern.

I will also be installing eDirectory on a Windows server and possibly leaving a Netware box up as a R/W replica but not 100% sure of that yet.

Any suggestions would be appreciated.

Thanks ]]> GW7: Install-Setup-Admin JPaul http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392334-migration-windows.html Deleting GW users - Best practice http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392281-deleting-gw-users-best-practice.html Wed, 11 Nov 2009 16:20:03 GMT We have a lot of inactive GW users to delete. I was wondering if it is necessary to first log in as each user and delete any accumulated e-mail in... We have a lot of inactive GW users to delete. I was wondering if it is necessary to first log in as each user and delete any accumulated e-mail in their mail boxes and then delete the account?

Or is it sufficient to simply delete the account? Will this automatically also delete all their messages and not leave back any orphaned message file fragments?

Please advise.

Thanks very much,

KML ]]> GW7: Install-Setup-Admin Kenlobo http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392281-deleting-gw-users-best-practice.html GroupWise Address book and phone numbers http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392196-groupwise-address-book-phone-numbers.html Tue, 10 Nov 2009 21:55:25 GMT I'm hoping someone can help me here.

I'm trying to edit the phone numbers that are in our GroupWise address book. I can do it through console one, but it takes for ever to do every user individually. Is there a way to view/edit all the users so I can just quickly change the user to have the correct phone number and move on.

Currently I'm opening a user, updating the phone number, pressing apply then closing the user and opening another user...etc. TAKING FOR EVER!!!!

Any shortcut would be awesome.

Thanks for any help in advance. ]]> GW7: Install-Setup-Admin estropes http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392196-groupwise-address-book-phone-numbers.html GW703 mail stats http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392183-gw703-mail-stats.html Tue, 10 Nov 2009 20:15:31 GMT We're looking at implementing some auto delete of mail after x amount
of days (yeah, little late I know). When I try to run an Expire /
Reduce stats & pick x amount of days to gather stats on, it never
returns anything being older than x days.

Suggestions?

--
Stevo
]]> GW7: Install-Setup-Admin Stevo http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392183-gw703-mail-stats.html Restore area post office http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392164-restore-area-post-office.html Tue, 10 Nov 2009 18:30:44 GMT Can the restore area post office be on any server accessible by my users? Or does it have to be a server with edirectory on it. Can the restore area post office be on any server accessible by my users? Or does it have to be a server with edirectory on it.
]]> GW7: Install-Setup-Admin Brian http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/392164-restore-area-post-office.html Multiple Systems Single Server http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/391916-multiple-systems-single-server.html Sun, 08 Nov 2009 19:27:17 GMT Wondering if its possible to create a second or even third GW system (7.0.3HP2) on the same server (dedicated to GW only) and then move an entire... Wondering if its possible to create a second or even third GW system
(7.0.3HP2) on the same server (dedicated to GW only) and then move an entire
domain/post office and its users to that new system. Just looking to get
more granular with configuration. Total user count currently on the server
is 100 or less but there are multiple domains and they have issues with same
name and user doesn't want to change. Currently everyone is on the same
system with multple domains but would like to end up with 3 systems.

Martin Stepanek
Max International Associate
martin@maxgxlnorth.ca
(705) 794-7181
( http://www.maxgxlnorth.ca/ )
There is no chance, no destiny, no fate that can circumvent or hinder or
control the firm resolve of a determined soul. - Ella Wheeler Wilcox

]]> GW7: Install-Setup-Admin Martin Stepanek http://forums.novell.com/novell-product-support-forums/groupwise/groupwise-7x/gw7-install-setup-admin/391916-multiple-systems-single-server.html