11 Hard power hits in an hour

Well, I'm obviously not capable af using multiple user accounts on my
NNTP reader :-) Sorry Mads.
The prevoius post was me.

- Allan

On Mon, 04 Feb 2008 11:11:52 GMT, Mads Andersen <dukan@tronej.dk>
wrote:

>I've written about this before. It's probably because one of your
>volumes are damaged, and you need to do a rebuild. But that is
>impossible, even if the box gets up and running without DATA, then you
>will (most of the time) get a blank screen when running NSS /REBUILD.
>
>So, do this:
>
>Press F8 during boot.
>Answer NO to everything.
>Goto NWSERVER.
>Start the server using SERVER -NS
>When the server is up, type: STARTUP.NCF
>When everything is up, type: LOADSTAGE 1
>You will now have activated pools.
>
>Type NSS /POOLREBUILD=DATA_POOL
>Wait for completion.
>Type NSS /POOLREBUILD=SYS
>Wait for completion.
>
>Type RESTART SERVER immediately.
>
>Now I would recommend that you do the whole thing again using:
>Type NSS /POOLREBUILD=DATA_POOL /PURGE
>Type NSS /POOLREBUILD=SYS /PURGE
>
>Hope it helps.
>
>Regards
>Allan
>
>
>On Mon, 28 Jan 2008 20:43:23 GMT, LJones@co.linn.or.us (Larry) wrote:
>
>>HI, I have a BOMA appliance that took 11 hard power hits earlier today
>>(snow and ice in the pacific NW). I believe it corrupted the OS, ...I
>>know...now is the perfect time to switch to OES2, and I'm planning on
>>doing that, but I'd like to plan the migration instead. The box powers
>>up, however while loading the OS, the OS reports in RED letters the server
>>will be powering down for a reboot, ABENDS and starts the os loading cycle
>>again. I've searched the documentation for commands for a controlled
>>boot, but have failed to locate any. Anyone know of a location for those
>>commands?
>>