NOVELL FORUMS

fanelli · #1 16-Sep-2008, 10:06 AM

Please bare with me, I am a student and just learning about Novell.
I am attaching my error logs in hope that someone can help with this problem.

Rebooting did not fix, but I could bring up Volume with nss/poolrebuild/purge command.

I am trying to find what caused deactivation of volume: Error codes to follow.

14-sep-2008 05:34:32 lvl="LOG_ERR" [NSS.NLM - v3.22-0]
[Error] comnPool.c[2657]
Sep 14, 2008 5:34:32 am NSS<COMN>-3.22-xxxx:
Pool SYS: System data I/O error 20204(zio.c[2179]).
Block 53399988(file block 175488)(ZID 3)

14-sep-2008 05:34:36 lvl="LOG_ERR" [NSS.NLM - v3.22-0]
[Error] zfsVolumeData.c[212]
Sep 14, 2008 5:34:37 am NSS<ZLSS>-3.22-1449:
Error reading VolumeData Block 53408867, status=20206.

14-sep-2008 05:34:36 lvl="LOG_ERR" [NSS.NLM - v3.22-0]
[Error] zfsVolumeData.c[212]
Sep 14, 2008 5:34:37 am NSS<ZLSS>-3.22-1449:
Error reading VolumeData Block 53408867, status=20206.

14-sep-2008 05:34:36 lvl="LOG_ERR" [NSS.NLM - v3.22-0]
[Error] zfsVolumeData.c[212]
Sep 14, 2008 5:34:37 am NSS<ZLSS>-3.22-1449:
Error reading VolumeData Block 35588355, status=20206.

14-sep-2008 05:34:36 lvl="LOG_ERR" [NSS.NLM - v3.22-0]
[Error] zlssLogicalVolume.c[4722]
Sep 14, 2008 5:34:37 am NSS<ZLSS>-3.22-1449:
<<< BAD MESSAGE >>>

14-sep-2008 05:34:36 lvl="LOG_ERR" [NSS.NLM - v3.22-0]
[Error] zfsVolumeData.c[212]
Sep 14, 2008 5:34:37 am NSS<ZLSS>-3.22-1449:
Error reading VolumeData Block 35588355, status=20206.

14-sep-2008 05:34:36 lvl="LOG_ERR" [NSS.NLM - v3.22-0]
[Error] zlssLogicalVolume.c[4722]
Sep 14, 2008 5:34:37 am NSS<ZLSS>-3.22-1449:
<<< BAD MESSAGE >>>

14-sep-2008 05:34:36 lvl="LOG_INFO" [ZLSS.NSS - v3.22-0]
[MSAP] comnLog.c[187]
Pool "SYS" - MSAP deactivate.

14-sep-2008 08:39:04 lvl="LOG_INFO" [NSS.NLM - v3.22-0]
[NSS] nssLog.c[136]
Log stopped

14-sep-2008 08:42:12 lvl="LOG_INFO" [NSS.NLM - v3.22-0]
[NSS] nssLog.c[95]
Log started

14-sep-2008 08:42:12 lvl="LOG_INFO" [ZLSS.NSS - v3.22-0]
[MSAP] comnLog.c[187]
Pool "SYS" - MSAP activate.
Server(49402C00-720B-11DA-A2-CC-000D60ECDA38) Cluster(00000000-0000-0000-00-00-000000000000)

14-sep-2008 08:42:12 lvl="LOG_INFO" [ZLSS.NSS - v3.22-0]
[MSAP] comnLog.c[187]
Pool "SYS" - Watching pool.

14-sep-2008 08:42:12 lvl="LOG_INFO" [ZLSS.NSS - v3.22-0]
[MSAP] comnLog.c[187]
Pool "SYS" - MSAP deactivate.

14-sep-2008 08:42:12 lvl="LOG_ERR" [NSS.NLM - v3.22-0]
[Error] comnPool.c[407]
Sep 14, 2008 8:42:13 am NSS<COMN>-3.22-689:
Could not change pool SYS to the ACTIVE state.
Status=20203 zio.c[1809].
Use 'NSS /ErrorCode=20203' to obtain more information.

14-sep-2008 08:42:46 lvl="LOG_INFO" [NSS.NLM - v3.22-0]
[NSS] nssLog.c[136]
Log stopped

14-sep-2008 08:44:38 lvl="LOG_INFO" [NSS.NLM - v3.22-0]
[NSS] nssLog.c[95]
Log started

14-sep-2008 08:44:38 lvl="LOG_INFO" [ZLSS.NSS - v3.22-0]
[MSAP] comnLog.c[187]
Pool "SYS" - MSAP activate.
Server(49402C00-720B-11DA-A2-CC-000D60ECDA38) Cluster(00000000-0000-0000-00-00-000000000000)

14-sep-2008 08:44:38 lvl="LOG_INFO" [ZLSS.NSS - v3.22-0]
[MSAP] comnLog.c[187]
Pool "SYS" - Watching pool.

14-sep-2008 08:44:38 lvl="LOG_INFO" [ZLSS.NSS - v3.22-0]
[MSAP] comnLog.c[187]
Pool "SYS" - MSAP deactivate.

14-sep-2008 08:44:38 lvl="LOG_ERR" [NSS.NLM - v3.22-0]
[Error] comnPool.c[407]
Sep 14, 2008 8:44:39 am NSS<COMN>-3.22-689:
Could not change pool SYS to the ACTIVE state.
Status=20203 zio.c[1809].
Use 'NSS /ErrorCode=20203' to obtain more information.

Please excuse any misspelled words and my lack of understanding of Novell. I just started an intern position at school and need a little guidance. If I can provide you with more information that might be necessary to understand this problem, feel free to ask. I will do my best to accommodate.

Thanks
David Fanelli