Remote control slower with XP workstations

Nobody has been able to turn anything up.
It will try and see if I can find anything related to .NET slowness.

You may want to consider ZFD6.5 as an upgrade as ZFD3.x support is fading.
RC with 6.5 is blazing fast compared to 3.x. ( Jaw dropping differnce -
Honest.)


jgouellet@victrix.ca wrote:

> I have made traces with and without .NET and the only difference is the
> delay but response at the beginning of the remote session.
>
> Instead of being 10 ms between each request between station and server, at
> the start of the trace, with got over 3 or 5 seconds with NET.
>
> SO I assume that something is processing internaly in the station and
> delay the response.
>
> JG
>
> > Unfortunately No.
> >
> > A Network trace may help isolate what is going on and we may be able to
> find an end
> > around.
> >
> > Roland Kool wrote:
> >
> > > Any news yet?
> > >
> > > craig_d_wilson@yahoo.com wrote:
> > > > Let me ask............
> > > >
> > > > Roland Kool wrote:
> > > >
> > > >
> > > >>Hello,
> > > >>
> > > >>I came across this old thread because the problem described here, is
> > > >>exactly what we're running into with ZEN3.2SP3 and RC to WinXP SP1
> > > >>workstations. Making the initial connection takes up about 20
> seconds.
> > > >>Somewhere last year, I found a TID in the Knowledgebase indicating
> that
> > > >>the problem was caused by a conflict between the RC agent and .NET
> > > >>framework. I verified this by deinstalling .NET framework from the
> > > >>workstation. However, this is not a real solution, so I was
> wondering if
> > > >> a real solution has been found? I know ZEN3.2SP3 will be EOL this
> year
> > > >>and I can't find that TID anymore, so I think we just have some bad
> luck
> > > >>here.
> > > >>Anyone here who knows more or can verify?
> > > >>Thanks,
> > > >>
> > > >>Roland
> > > >>
> > > >>RVT wrote:
> > > >>
> > > >>>At least I'm not alone then. Since my first post, I'm now running
> ZFD3.2
> > > >>>SP3 as well. All XP clients have been upgraded to client
> 4.90SP2 "Update
> > > >>>C". Problem continues.........
> > > >>>
> > > >>>
> > > >>>"KC" <kc@sorrynoemail.com> wrote in message
> > > >>>news:AKV6d.6818$8p3.6476@prv-forum2.provo.novell.com...
> > > >>>
> > > >>>
> > > >>>>I have experienced this same slowdown issue with XP. On Win98
> machines the
> > > >>>>remote pops up almost immediately but with XP there is a 5-15
> second
> > > >>>>initial delay to pull up workstations. I'm running SP3 for ZFD3.2
> > > >>>>
> > > >>>>
> > > >>>>
> > > >>>>"RVT" <rvt@nospam.com> wrote in message
> > > >>>>news:ONyLc.8357$gg.1364@prv-forum2.provo.novell.com...
> > > >>>>
> > > >>>>
> > > >>>>>Hello everyone,
> > > >>>>>
> > > >>>>>Our XP rollout is just about complete. We have Zen3.2 (no SP)
> running on
> > > >>>>>NW6SP4. Once I am actually remoting the workstation, performance
> is not
> > > >>>>>a
> > > >>>>>problem. Speeds are good.
> > > >>>>>
> > > >>>>>However, that initial connection is now quite a bit slower than
> our NT/2K
> > > >>>>>workstations. From the time we click "Remote control", it can
> take
> > > >>>>>anywhere
> > > >>>>
> > > >>>>>from 5 - 20 seconds for the remote control screen to appear.
> > > >>>>
> > > >>>>>Any ideas as to what the problem is? We've been on Zen3.2 (no
> SP) for
> > > >>>>>quite
> > > >>>>>awhile with no issues. We're targeting a Zen4 upgrade for later
> in
> > > >>>>>October.
> > > >>>>>But I'm wondering if there's anything I can do in the interim.
> > > >>>>>
> > > >>>>>Thanks in advance.
> > > >>>>>
> > > >>>>>Ryan
> > > >>>>>
> > > >>>>>
> > > >>>>
> > > >>>>
> > > >>>
> > > >
> > > > --
> > > > Craig Wilson
> > > > CNE3, 4, 5 - MCSE - CCNA
> > > > NSC Sysop (http://support.novell.com/forums/)
> > > >
> > > > Tech Writer - http://www.ithowto.com
> > > > (I Peter 4:10)
> > > >
> > > >
> >
> > --
> > Craig Wilson
> > CNE3, 4, 5 - MCSE - CCNA
> > NSC Sysop (http://support.novell.com/forums/)
> >
> > Tech Writer - http://www.ithowto.com
> > (I Peter 4:10)
> >
> >