When I run STARTIFOLDER I get the following error:

[DateTime] [crit] (10091)Unknown error: make_secure_socket: for port
443,
WSAIoctl: (SO_SSL_SET_SERVER)

I've checked out the following TID's :
10070141 and 10070605

Neither of the fixes here seem to help.

httpd.conf attached below :

#
# Based upon the NCSA server configuration files originally by Rob
McCool.
#
# This is the main Apache server configuration file. It contains the# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about

# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are

unsure
# consult the online docs. You have been warned.
#
# After this file is processed, the server will look for and process
# sys:/apache/conf/srm.conf and then sys:/apache/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
#
# The configuration directives are grouped into three basic sections:# 1. Directives that control the operation of the Apache server
process
as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default'

server,
# which responds to requests that aren't handled by a virtual
host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent
to
# different IP addresses or hostnames and have them handled by the

# same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for
many
# of the server's control files begin with "/" (or "drive:/" for Win32
and
# sys:/ for NetWare), the server will use that explicit path. If the# filenames do *not* begin with "/", the value of ServerRoot is
prepended
# -- so "logs/foo.log" with ServerRoot set to "/usr/local/apache"
will be
# interpreted by the server as "/usr/local/apache/logs/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of
Apache,
# such as the number of concurrent requests it can handle or where it# can find its configuration files.
#

#
# ServerType is either inetd, or standalone. Inetd mode is only
supported
on
# Unix platforms.
#
ServerType standalone

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)# mounted filesystem then please read the LockFile documentation
# (available at
<URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
#
ServerRoot "sys:/apache"

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile logs/ifolder_httpd.pid

#
# ScoreBoardFile: File used to store internal server process
information.
# Not all architectures require this. But if yours does (you'll know

because
# this file will be created when you run Apache) then you *must*
ensure
that
# no two invocations of Apache share the same scoreboard file.
#
ScoreBoardFile logs/ifolder_apache_status

#
# In the standard configuration, the server will process this file,
# srm.conf, and access.conf in that order. The latter two files are
# now distributed empty, as it is recommended that all directives
# be kept in a single file for simplicity. The commented-out values
# below are the built-in defaults. You can have the server ignore
# these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf

#
# Timeout: The number of seconds before receives and sends time out.
#
##Timeout 300
Timeout 30

#
# KeepAlive: Whether or not to allow persistent connections (more than

# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited
amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request
from the
# same client on the same connection.
#
KeepAliveTimeout 15

#
# Number of concurrent threads (i.e., requests) the server will allow.

# Set this value according to the responsiveness of the server (more
# requests active at once means they're all handled more slowly) and
# the amount of system resources you'll allow the server to consume.
#
##ThreadsPerChild 50
ThreadsPerChild 150

#
# When NetWare creates a thread you need to specify the stack size.
# You may need to increase this if you get stack overflows.

ThreadStackSize 65536

#
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the# libraries it uses) leak memory or other resources. On most systems,
this
# isn't really needed, but a few (such as Solaris) do have notable
leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
#
# NOTE: This value does not include keepalive requests after the
initial
# request per connection. For example, if a child process
handles
# an initial request and 10 subsequent "keptalive" requests, it# would only count as 1 request towards this limit.
#
MaxRequestsPerChild 0

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
Listen 80

#
# BindAddress: You can support virtual hosts with this option. This
directive
# is used to tell the server which IP address to listen to. It can
either
# contain "*", an IP address, or a fully qualified Internet domain
name.
# See also the <VirtualHost> and Listen directives.
#
#BindAddress *

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a
DSO
you
# have to place corresponding `LoadModule' lines at this location so
the
# directives contained in it are actually available _before_ they are
used.
# Please read the file http://httpd.apache.org/docs/dso.html for more# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in
your
httpd
# binary.
#
# Note: The order is which modules are loaded is important. Don't
change
# the order below without expert advice.

# LoadModule anon_auth_module modules/authanon.nlm
# LoadModule cern_meta_module modules/cernmeta.nlm
# LoadModule digest_module modules/digest.nlm
# LoadModule expires_module modules/expires.nlm
# LoadModule headers_module modules/headers.nlm
# LoadModule proxy_module modules/proxy.nlm
# LoadModule rewrite_module modules/rewrite.nlm
# LoadModule speling_module modules/speling.nlm
# LoadModule status_module modules/status.nlm
# LoadModule info_module modules/info.nlm
# LoadModule unique_id_module modules/uniqueid.nlm
# LoadModule usertrack_module modules/usrtrack.nlm
LoadModule tls_module modules/mod_tls.nlm
# LoadModule vhost_alias_module modules/vhost.nlm

#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information
(ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.

#
#ExtendedStatus On

### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
#
Port 80

#
# ServerAdmin: Your address, where problems with the server should be# e-mailed. This address appears on some server-generated pages, such

# as error documents.
#
ServerAdmin someone@somewhere.com

#
# ServerName allows you to set a host name which is sent back to
clients
for
# your server if it's different than the one the program would get
(i.e.,
use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name
you
# define here must be a valid DNS name for your host. If you don't
understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP
address
here.
# You will have to access it by its address (e.g.,
http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
#
ServerName bhs2.ballaraths.vic.edu.au

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory,
but
# symbolic links and aliases may be used to point to other locations.#
DocumentRoot "sys:/apache/htdocs"

#
# Each directory to which Apache has access, can be configured with
respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# permissions.
#
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "sys:/apache/htdocs">
#
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"# doesn't give it to you.
#
Options Indexes FollowSymLinks MultiViews

#
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination
of "Options", "FileInfo",
# "AuthConfig", and "Limit"
#
AllowOverride None

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
</Directory>

#
# UserDir: The name of the directory which is appended onto a user's
home
# directory if a ~user request is received.
#
<IfModule mod_userdir.c>
UserDir /home/*/public_html
</IfModule>

#
# Control access to UserDir directories. The following is an example# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>

#
# DirectoryIndex: Name of the file or files to use as a pre-written
HTML
# directory index. Separate multiple entries with spaces.
#
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>

#
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</Files>

#
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache"
with
each
# document that was negotiated on the basis of content. This asks
proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs

#
# UseCanonicalName: (new for 1.3) With this setting turned on,
whenever
# Apache needs to construct a self-referencing URL (a URL that refers
back
# to the server the response is coming from) it will use ServerName
and
# Port to form a "canonical" name. With this setting off, Apache will

# use the hostname:port that the client supplied, when possible. This

# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName On

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
<IfModule mod_mime.c>
TypesConfig conf/mime.types
</IfModule>

#
# DefaultType is the default MIME type the server will use for a
document
# if it cannot otherwise determine one, such as from filename
extensions.
# If your server contains mostly text or HTML documents, "text/plain"
is
# a good value. If most of your content is binary, such as
applications
# or images, you may want to use "application/octet-stream" instead to

# keep browsers from trying to display binary files as though they are

# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints
from the
# contents of the file itself to determine its type. The
MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global# Environment' section], or recompile the server and include
mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule>
container.
# This means that the MIMEMagicFile directive will only be processed
if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses

# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if
people
# had to knowingly turn this feature on, since enabling it means that# each client request will result in AT LEAST one lookup request to
the
# nameserver.
#
HostnameLookups Off

#
# LogRotateDaily: If set to 'on' logfiles rotate daily.
# LogRotateInterval s: If set, logfiles rotate after s seconds.
# The LogRotateDaily and LogRotateInterval directives are mutually
# exclusive. The rotated log file name adds the date suffix of
# YYYYMMDD to identify when the log was rotated.
#
# LogRotateDaily on
# LogRotateInterval 86400

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a
<VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/ifolder_error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
\"%{User-Agent}i\""
combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# The location and format of the access logfile (Common Logfile
Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog logs/ifolder_access_log common

#
# If you would like to have agent and referer logfiles, uncomment the# following directives.
#
#CustomLog logs/ifolder_referer_log referer
#CustomLog logs/ifolder_agent_log agent

#
# If you prefer a single logfile with access, agent, and referer
information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog logs/ifolder_access_log combined

#
# Optionally add a line containing the server version and virtual host

# name to server-generated pages (error documents, FTP directory
listings,
# mod_status and mod_info output etc., but not CGI generated
documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#
ServerSignature On

#
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
<IfModule mod_alias.c>

#
# Note that if you include a trailing / on fakename then the
server
will
# require it to be present in the URL. So "/icons" isn't aliased
in
this
# example, only "/icons/". If the fakename is slash-terminated,
then
the
# realname must also be slash terminated, and if the fakename
omits
the
# trailing slash, the realname must also omit it.
#
Alias /icons/ "sys:/apache/icons/"

<Directory "sys:/apache/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>

# This Alias will project the on-line documentation tree under
/manual/
# even if you change the DocumentRoot. Comment it if you don't
want to
# provide access to the on-line documentation.
#
Alias /manual/ "sys:/apache/htdocs/manual/"

<Directory "sys:/apache/htdocs/manual">
Options Indexes FollowSymlinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>

#
# ScriptAlias: This controls which directories contain server
scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications
and
# run by the server when requested rather than as documents sent
to
the client.
# The same rules about trailing "/" apply to ScriptAlias
directives as
to
# Alias.
#
ScriptAlias /cgi-bin/ "sys:/apache/cgi-bin/"

#
# "sys:/apache/cgi-bin" should be changed to whatever your
ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "sys:/apache/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>

</IfModule>
# End of aliases.

#
# Redirect allows you to tell clients about documents which used to
exist
in
# your server's namespace, but do not anymore. This allows you to tell
the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#

#
# Directives controlling the display of server-generated directory
listings.
#
<IfModule mod_autoindex.c>

#
# FancyIndexing is whether you want fancy directory indexing or
standard
#
IndexOptions FancyIndexing

#
# AddIcon* directives tell the server which icon to show for
different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon is which icon to show for files which do not have an
icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a
file
in
# server-generated indexes. These are only displayed for
FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

#
# ReadmeName is the name of the README file the server will look
for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
#
# The server will first look for name.html and include it if
found.
# If name.html doesn't exist, the server will then look for
name.txt
# and include it as plaintext if found.
#
ReadmeName README
HeaderName HEADER

#
# IndexIgnore is a set of filenames which directory indexing
should
ignore
# and not include in the listing. Shell-style wildcarding is
permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

</IfModule>
# End of indexing directives.

#
# Document types.
#
<IfModule mod_mime.c>

#
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+)

uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have

nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz

#
# AddLanguage allows you to specify the language of a document.
You can
# then use content negotiation to give a browser a file in a
language
# it can understand.
#
# Note 1: The suffix does not have to be the same as the language

# keyword --- those with documents in Polish (whose net-standard # language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbreviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three

char
# specifier. But there is 'work in progress' to fix this and get # the reference data for rfc1766 cleaned up.
#
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk
(nn)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
#
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage he .he
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .sv
AddLanguage cz .cz
AddLanguage ru .ru
AddLanguage tw .tw
AddLanguage zh-tw .tw
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8

# LanguagePriority allows you to give precedence to some languages

# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We
have
# more or less alphabetized them here. You probably want to change

this.
#
<IfModule mod_negotiation.c>
LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br
ru
ltz ca es sv tw
</IfModule>

#
# AddType allows you to tweak mime.types without actually editing
it,
or to
# make certain files to be certain types.
#
AddType application/x-tar .tgz

#
# AddHandler allows you to map certain file extensions to
"handlers",
# actions unrelated to filetype. These can be either built into
the
server
# or added with the Action command (see below)
#
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
#
# To use CGI scripts:
#
#AddHandler cgi-script .cgi

#
# To use server-parsed HTML files
#
#AddType text/html .shtml
#AddHandler server-parsed .shtml

#
# Uncomment the following line to enable Apache's send-asis HTTP
file
# feature
#
#AddHandler send-as-is asis

#
# If you wish to use server-parsed imagemap files, use
#
#AddHandler imap-file map

#
# To enable type maps, you might want to use
#
#AddHandler type-map var

</IfModule>
# End of document types.

#
# Action lets you define media types that will execute a script
whenever
# a matching file is called. This eliminates the need for repeated URL

# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# MetaDir: specifies the name of the directory in which Apache can
find
# meta information files. These files contain additional HTTP headers# to include when sending the document
#
#MetaDir .web

#
# MetaSuffix: specifies the file name suffix for the file containing
the
# meta information.
#
#MetaSuffix .meta

#
# Customizable error response (Apache style)
# these come in three flavors
#
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the (") marks it as text, it does not get output
#
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-

includes.
#
# 3) external redirects
#ErrorDocument 402 http://some.other-server.com/subscription_info.html

# N.B.: Many of the environment variables associated with the
original
# request will *not* be available to such a script.

#
# Customize behaviour based on the browser
#
<IfModule mod_setenvif.c>

#
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and
browsers
that
# spoof it. There are known problems with these browser
implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly

# support keepalive when it is used on 301 or 302 (redirect)
responses.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
force-response-
1.0

#
# The following directive disables HTTP/1.1 responses to browsers
which
# are in violation of the HTTP/1.0 spec by not being able to grok
a
# basic 1.1 response.
#
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0

</IfModule>

#
# Allow server status reports, with the URL of
http://servername/server-
status
# Change the ".your-domain.com" to match your domain to enable.
#
<IfModule mod_status.c>
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from .your-domain.com
</Location>
</IfModule>

#
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).

# Change the ".your-domain.com" to match your domain to enable.
#
<IfModule mod_info.c>
<Location /server-info>
SetHandler server-info
Order deny,allow
Deny from all
Allow from .your-domain.com
</Location>
</IfModule>

#
# There have been reports of people trying to abuse an old bug from
pre-1.1
# days. This bug involved a CGI script distributed as a part of
Apache.
# By uncommenting these lines you can redirect these attacks to a
logging
# script on phf.apache.org. Or, you can record them yourself, using
the
script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>

#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#ProxyRequests On
#
#<Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
#</Directory>

#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#
#ProxyVia On

#
# To enable the cache as well, edit and uncomment the following lines:

# (no cacheing without CacheRoot)
#
#CacheRoot "sys:/apache/proxy"
#CacheSize 5
#CacheGcInterval 4
#CacheMaxExpire 24
#CacheLastModifiedFactor 0.1
#CacheDefaultExpire 1
#NoCache a-domain.com another-domain.edu joes.garage-sale.com

#</IfModule>
# End of proxy directives.

### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on
your
# machine you can setup VirtualHost containers for them.
# Please see the documentation at
<URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host

# configuration.

#
# If you want to use name-based virtual hosts you need to define at
# least one IP address (and port number) for them.
#
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
#
#<VirtualHost ip.address.of.host.some-domain.com>
# ServerAdmin webmaster@host.some-domain.com
# DocumentRoot /www/docs/host.some-domain.com
# ServerName host.some-domain.com
# ErrorLog logs/host.some-domain.com-error_log
# CustomLog logs/host.some-domain.com-access_log common
#</VirtualHost>

#<VirtualHost _default_:*>
#</VirtualHost>

#
# SecureListen is the same as the Listen directive only it
# ensures the port will be secure. The second parameter
# specifies the certificate to use. "SSL CertificateIP" is
# the default.
#

#<IfModule mod_tls.c>
SecureListen 443 "SSL CertificateApache"
#</IfModule>

include SYS:\Apache\iFolder\Server\httpd_ifolder_nw.conf