After upgrading btrieve, the server would not boot up. It would get a
SPXSOCKET error and hang. After pulling our hair out we got it to load
up fine when we enabled the IPX protocol again. The server came up fine
with the exception of NDPS. It now takes 20 minutes or more to finish
loading the NDPS Manager. At this point users can print ok except if they
are using a printer setup for IPP printing. ( we use this to print our
Cyborg/Payroll reports so come Monday we will have lots of unhappy campers)
The error the users get is:

Error Message: winsock 10060- connection has timed out
error group winsock
error code 10060

printer name:ipp// port lpt2

I also see on the Logger screen a HostMIB NDPS error