After enable "Shareable for clustering" on a SAN device and install y
configure a new cluster, the 2 nss volumes on that SAN device did not mount
on next reboot. I got the following error messages on /var/log/messages:
Aug 2 20:00:03 bceqlnx1 kernel: NSSLOG ==> [Error] comnVol.c[2989]
Aug 2 20:00:03 bceqlnx1 kernel: Aug 2, 2010 8:00:03 pm
NSS<COMN>-4.12a-660:
Aug 2 20:00:03 bceqlnx1 kernel: Volume VOL2 not found. Verify Media,
Devices, Drivers and power
Aug 2 20:00:03 bceqlnx1 kernel: to subsystem. Try NSS /Activate=VOL2 and
or type NSS /volumes and
Aug 2 20:00:03 bceqlnx1 kernel: verify spelling of the volume
Aug 2 20:00:03 bceqlnx1 kernel: Volume Change State failed. Error = 20801

Aug 2 20:04:36 bceqlnx1 kernel: NSS: Clearing the NSS private cache for a
pool
Aug 2 20:04:36 bceqlnx1 kernel: NSSLOG ==> [MSAP] comnLog.c[201]
Aug 2 20:04:36 bceqlnx1 kernel: Pool "VOL2" - MSAP deactivate.
Aug 2 20:04:36 bceqlnx1 kernel: NSS: Clearing the NSS private cache for a
pool
Aug 2 20:04:36 bceqlnx1 kernel: NSSLOG ==> [Error] comnPool.c[402]
Aug 2 20:04:36 bceqlnx1 kernel: Aug 2, 2010 8:04:36 pm
NSS<COMN>-4.12a-689:
Aug 2 20:04:36 bceqlnx1 kernel: Could not change pool VOL2 to the
ACTIVE state.
Aug 2 20:04:36 bceqlnx1 kernel: Status=20833 zfsPool.c[1757].
Aug 2 20:04:36 bceqlnx1 kernel: Use 'NSS /ErrorCode=20833' to obtain more
information.

After disable "Shareable for clustering" on that SAN device, I got out of
this error and the nss volumes get mounted OK.

Thanks in advance for any help.