Hello,

I'm working on moving over to WinPE imaging to overcome driver/compatibility issues with Linux imaging. However, I'm running into some trouble imaging certain devices.

Both fleets of HP Probook 430 G4 and Dell Latitude 3380 and experiencing the same problem. I'm assigning the appropriate imaging bundle and applying it to the devices, they boot into WinPE but fails. The WorkToDoDebug.txt on the device shows:

Code:
07/12/18 - 13:29:17 - connected to server 
07/12/18 - 13:29:17 - wstree sent  
07/12/18 - 13:29:18 - found hardware also 
07/12/18 - 13:29:18 - sent PSI  
07/12/18 - 13:29:18 - reading data from server  
07/12/18 - 13:29:18 - <ZENworks-Imaging><Type>Restore-ZENworks-winPE-Image</Type><File>C:\Program Files (x86)\Novell\ZENworks\work\content-repo\images\win10-base-winpe-v1.zmg</File><ServerIP>172.16.0.142</ServerIP><FileSet>1</FileSet></ZENworks-Imaging> 
07/12/18 - 13:29:18 - extracting params  
07/12/18 - 13:29:18 - got WinPE ZMG restore image work  
07/12/18 - 13:29:18 - C:\Program Files (x86)\Novell\ZENworks\work\content-repo\images\win10-base-winpe-v1.zmg 
07/12/18 - 13:29:18 - 172.16.0.142 
07/12/18 - 13:29:18 - got winpe File Set value 
07/12/18 - 13:29:18 - updating ISD as attempting 
07/12/18 - 13:29:18 - Got ZENworks WinPE Imaging task 
07/12/18 - 13:29:18 - NOVELL_FIRMWARE_UEFI set by user,Consider firmware Type Flag : UEFI 
07/12/18 - 13:29:18 - Firmware Type Flag : UEFI 
07/12/18 - 13:29:18 - Img invoked from WinPE manual mode 
07/12/18 - 13:29:18 - Img.exe -rp "C:\Program Files (x86)\Novell\ZENworks\work\content-repo\images\win10-base-winpe-v1.zmg" -ip=172.16.0.142 -set=1 
07/12/18 - 13:29:34 - NOVELL_FIRMWARE_UEFI set by user,Consider firmware Type Flag : UEFI 
07/12/18 - 13:29:34 - Firmware Type Flag : UEFI 
07/12/18 - 13:29:34 - ZISD task state and return code:4 802 
07/12/18 - 13:29:34 - Failed to complete ZENWorks WinPE Imaging work
I boot into WinPE maintenance mode and run following command:

Code:
img -rp "C:\Program Files (x86)\Novell\ZENworks\work\content-repo\images\win10-base-winpe-v1.zmg" -ip=xxx.xxx.xxx.xxx
It creates the partitions then comes up with:

Code:
Error: Error reading from archive
Both devices obtain an IP addresses in WinPE and I can ping the image repo. I've added the latest NIC drivers to the .wim and updated BIOS on both.

The same bundle works on other devices without a problem.