Results 1 to 2 of 2

Thread: Server Crashed Mismatch Mirror?

  1. #1
    ad1082 NNTP User

    Server Crashed Mismatch Mirror?

    now my server crashed today with no warning just a few days ago I had to
    replace a failed drive on my Power edge 2650 server so the tech brought
    the drive out. It was replaced and the rebuild took about 5-6 hours. No
    problems that I could see that was on Monday Oct 1st now as I said today
    the server crashed nothing was written to the abend log and nothing
    other than the "a critical error has occurred on server athena" was
    written to the sys error log it shows nothing occurring before the
    shutdown took place.

    The server rebooted itself but I was able to see that VREPAIR
    automatically ran on the COMMON VOLUME the error was mismatched mirror
    then all the volumes mounted and every one logged back in no problems.
    My question is how do I make sure that the volumes are mirrored
    properly I able to access Remote Manager and IMANAGER but am not sure
    how to check to see if the drives that are supposed to be mirrored are
    still mirrored.

    Current Support Pack Info:
    Novell Netware, V6.5 Support Pack 3 - CPR Release Server Version
    5.70.03, May 23, 2005 - Server Up Time: 0:01:17:13

    Server Configuration is as follows:

    2-18GB contains OS drives are using Raid 1

    3-146GB drives contains data using Raid 5




  2. #2
    Mark Robinson NNTP User

    Re: Server Crashed Mismatch Mirror?

    On Wed, 02 Nov 2005 18:37:00 +0000, ad1082 wrote:
    > Current Support Pack Info:
    > Novell Netware, V6.5 Support Pack 3 - CPR Release Server Version

    Please repost to

    Mark Robinson
    Novell Volunteer SysOp

    One by one the penguins steal my sanity...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts