Hi All,

We're trying to migrate all our existing OES NetWare boxes to OES
Linux. In the process, we want to replace BackupExec with Commvault for
our backup solution.

So far, in testing, our throughput to tape from Linux NSS volumes has
been significantly slower than expected...

We're running Dell 2850's fibre attached to a Dell ML6000 LTO3 library.
All the data on the NSS volume in on an EMC CX-700 array.

Under NetWare CommVault could get up to 60+GB per hour. Under Linux,
we're down to 7-10GB per hour...

Does anyone have any experience of this type of environment, and any
suggestions as to what we should be looking at?