I am trying to connect a Dell PE2650 to a IBM FAStT 700 SAN with 2 IBM
FS2/133-24P0960 HBAs. I have verified BIOS versions for the server,
PERC3/DC RAID controller and all NLMs, CDMs, HAMs. With the SET MULTI-
PATH SUPPORT=ON parameter set in the STARTUP.NCF, the SYS volume does not
get mounted and the following message is on the Log screen:

PROCESS LD DEVICE IO REQUEST: ERROR: LDD DOES NOT SUPPORT ONLY STANDARD
INQUIRY

If I remove the SET parameter the SYS volume mounts but I do not have HBA
failover. The following is my STARTUP.NCF

SET MULTI-PATH SUPPORT=ON

LOAD ACPIDRV.PSM
######## End PSM Drivers ########
LOAD IDECD.CDM
LOAD LSIMPE.CDM
LOAD SCSIHD.CDM AEN
LOAD BAKPLANE.CDM
######## End CDM Drivers ########
LOAD IDEATA.HAM SLOT=10009
LOAD PEDGE3.HAM SLOT=202
LOAD ADPT160M.HAM SLOT=10021
LOAD ADPT160M.HAM SLOT=10022
LOAD QL2300.HAM SLOT=1 /LUNS /portnames /xretry=400
LOAD QL2300.HAM SLOT=3 /LUNS /portnames /xretry=400
######## End HAM Drivers ########
LOAD CHARSET.NLM CP850


Any help appreciated
Thanks
Jamie