I'm using Nw6sp5 on a CPQ proliant ML370 machine.

After 10 days, arp stop to works. All is fine before.
(I'm using pktscan on the server, I and could say that the external arp
request comes to the server, but this one never respond. If I try to ping
from the server an IP address, the server never send an arp request).
At he the same time, IPX works fine.

When arp stop to work, if I try to use inetcfg.nlm and and change some
settings (like the board status from enable to disable or arp params) the
module hang and the server abend.

The "arp timer" is disabled (by default): is that correct ?

(Server SERVER halted Tuesday, 27 December 2005
Abend 1 on P00: Server-5.60.05: Page Fault Processor Exception (Error code

CS = 0008 DS = 0010 ES = 0010 FS = 0010 GS = 0010 SS = 0010
EAX = 8A9C3000 EBX = 8A58B0E0 ECX = 0000006F EDX = 00000000
ESI = 8A58B0E0 EDI = 203120D4 EBP = 00000006 ESP = 8A8BD778
EIP = 85FA5F5A FLAGS = 00010246
85FA5F5A 8B0407 MOV EAX,[EDI+EAX]=?
EIP in NWSNUT.NLM at code start +0000CF5Ah
Access Location: 0xAACD50D4
Running process: MPR CONSOLE 1 Process
Thread Owned by NLM: INETCFG.NLM
Stack pointer: 8A8BD9C4
OS Stack limit: 8A8BA480
Scheduling priority: 67371008
Wait state: 5050170 Blocked on keyboard
Additional Information:
The CPU encountered a problem executing code in NWSNUT.NLM. The
problem may be in that module or in data passed to that module by a process
owned by INETCFG.NLM.

Any idea welcome !