We recently purchased Yosemite Backup software. We have installed the
software off the CD and onto the SYS volume. The problem comes when we try
to load the software for the first time. I can enter my admin username and
password and it accepts it. The server then crashes when it starts loading
stuff immediately after that.

I followed the instructions in the install guide to edit the
c:\nwserver\startup.ncf file to load NWASPI.CDM. This particular server has
an onboard Adaptec SCSI driver that controlls one SCSI device: the hard
drive with the SYS volume (the DATA volume is on a SATA hard drive and SATA
RAID card).

Do you have any ideas on what to try next?

Matthew


-
Novell Open Enterprise Server, NetWare 6.5
PVER: 6.50.04

Server RHINO halted Monday, January 30, 2006 4:40:32.143 pm
Abend 1 on P00: Server-5.70.04-0: NWPA-023: CDI_Blocking_Execute_HACB called
with invalid message state

Registers:
CS = 0060 DS = 007B ES = 007B FS = 007B GS = 007B SS = 0068
EAX = BD865B00 EBX = 0686003B ECX = 0686003B EDX = 4FDD8EE0
ESI = 4FAA2380 EDI = 4FC2FF4C EBP = 4FDD8F08 ESP = 4FDD8EDC
EIP = BD850E37 FLAGS = 00000202
BD850E37 83C404 ADD ESP, 00000004
EIP in NWPA.NLM at code start +0000CE37h

The violation occurred while processing the following instruction:
BD850E37 83C404 ADD ESP, 00000004
BD850E3A 57 PUSH EDI
BD850E3B 8B542404 MOV EDX, [ESP+04]
BD850E3F 8B442408 MOV EAX, [ESP+08]
BD850E43 8982C8000000 MOV [EDX+000000C8], EAX
BD850E49 8B442404 MOV EAX, [ESP+04]
BD850E4D C780CC00000000 MOV [EAX+000000CC], 00000000
000000BD850E57 8B442404 MOV EAX, [ESP+04]
BD850E5B C780EC00000000 MOV [EAX+000000EC], 00000000
000000BD850E65 8B7C2404 MOV EDI, [ESP+04]



Running process: yt SUP 6 Process
Thread Owned by NLM: YTNETSUP.NLM
Stack pointer: 4FDD8FEC
OS Stack limit: 4FDC9000
Scheduling priority: 67371008
Wait state: 00 Suspend Reason UNKNOWN
Stack: -BD85CD14 (NWPA.NLM|(Data Start)+D14)
--BD865B00 (NWPA.NLM|guidCDMHandle+713C)
--BCAFE440 ?
--4F9FE000 ?
4FEE83F4 (YTNETNPA.NLM|LclCdmStartBusScan+99)
--00000006 ?
--0686003B ?
--4FAA2380 ?
--BD865B20 (NWPA.NLM|guidCDMHandle+715C)
--00000000 ?
--00000000 ?
--4FDD8F3C ?
4FC2FF4C (YTNETSUP.NLM|PrvThreadStart+0)
--4FAA2380 ?
--4F9FE000 ?
4FEE8559 (YTNETNPA.NLM|LclStartScan+D9)
-4F9B5700 (YTNETNPA.NLM|NpaInfo+0)
-4F9B59D4 (YTNETNPA.NLM|NpaInfo+2D4)
--00000000 ?
--4FAA2380 ?
-4F9B59D4 (YTNETNPA.NLM|NpaInfo+2D4)
--00000000 ?
--00000000 ?
--43DE4180 ?
--4FDD8F64 ?
4FC2FF4C (YTNETSUP.NLM|PrvThreadStart+0)
--4FAA2380 ?
--4F9FE000 ?
4FEE885F (YTNETNPA.NLM|LclNpaServiceThread+A3)
-4F9B5700 (YTNETNPA.NLM|NpaInfo+0)
--00000002 ?
--00000000 ?
-4F9B5700 (YTNETNPA.NLM|NpaInfo+0)
0022C171 (SERVER.NLM|kValidateThread+11)
--4FDD8F84 ?
4FC2FF4C (YTNETSUP.NLM|PrvThreadStart+0)
--4FAA2380 ?
--4F9FE000 ?
4FC2FF7A (YTNETSUP.NLM|PrvThreadStart+2E)
--00000001 ?
--4FCF8928 ?
417D95B4 (CLIB.NLM|strtok+164)
--4FCF8900 ?
4FC2FF4C (YTNETSUP.NLM|PrvThreadStart+0)
--4FAA2380 ?
--4F9FE000 ?
416E1306 (THREADS.NLM|getcmd+21E)
--4FCF8900 ?
--65657246 ?
--65657246 ?
--00000246 ?
--4F9015A0 ?
--00000000 ?
416E1144 (THREADS.NLM|getcmd+5C)
--4EE01800 ?
--00000000 ?
416E113C (THREADS.NLM|getcmd+54)
--4EE01800 ?
--00000000 ?
--4F9015A0 ?
--00000000 ?
--4F9015A0 ?
-416FC750 (THREADS.NLM|(Data Start)+2750)
0022A728 (SERVER.NLM|TcoNewSystemThreadEntryPoint+40)
--4F9015A0 ?
--00000000 ?
--00000000 ?
--00000000 ?
--00000000 ?
--65657246 ?
--65657246 ?
--65657246 ?
--34343434 ?

Stack dump exceeded the valid memory limit

Additional Information:
The NetWare OS detected a problem with the system while executing a
process owned by NWPA.NLM. It may be the source of the problem or there may
have been a memory corruption.