My NW65 SP3 server (5GB of memory, 2 146GB mirrored sys, 3 146GB Data, 1
146GB HS) abended today as indicated below:
Server XXXXXXXX halted Monday, June 5, 2006 8:30:06.617 am
Abend 1 on P00: Server-5.70.03: Nonmaskable Interrupt Processor Exception
(Error code 00000024)

Registers:
CS = 0060 DS = 007B ES = 007B FS = 007B GS = 007B SS = 0068
EAX = FCC01282 EBX = 4BBAF6A0 ECX = 00000023 EDX = 0000004E
ESI = FCC01292 EDI = FCC011F2 EBP = 000000A0 ESP = B50E455C
EIP = 0012EFC6 FLAGS = 00010206
0012EFC6 F3A5 REP MOVSD
EIP in UNKNOWN memory area

The violation occurred while processing the following instruction:
0012EFC6 F3A5 REP MOVSD
0012EFC8 7302 JNB 0012EFCC
0012EFCA 66A5 MOVSW
0012EFCC 8B4C2414 MOV ECX, [ESP+14]
0012EFD0 8B74240C MOV ESI, [ESP+0C]
0012EFD4 8B7C243C MOV EDI, [ESP+3C]
0012EFD8 01E8 ADD EAX, EBP
0012EFDA 01E9 ADD ECX, EBP
0012EFDC 46 INC ESI
0012EFDD 894C2414 MOV [ESP+14], ECX



Running process: AS Main Process
Thread Owned by NLM: ARCSERVE.NLM
Stack pointer: B50E4B4C
OS Stack limit: B50D5400
....
Additional Information:
There may be some bad memory either on an adapter card or on the
motherboard. If the problem continues, try replacing the main system
memory or adapter cards to prevent future parity errors.

When I restarted the server, NWMKDE loads with an error NWMKDE- 2120 L2
Cache is not initialized. L1 is 104857600 bytes: current available mem
153878528 bytes: Physical mem 3220594688 size: Error id 2.

Could someone please explain to me why am getting the L2 cache errors when
starting netware.