I am having an issue regarding DNS name resolution when the server boots
up. I receive this in the Console.log file

DNS resolving name for 255.255.255.255 --> DNS Name not available

I have found a TID on the issue, TID (10100621) but it does not quite
address the problem. The TID mentions that there is a valid IP 147.2.91.52
and a second address of 0.0.0.0 However, my server for some reason has only
the 0.0.0.0

Here is an export of the reg file from my server.

REGEDIT4


[HKEY_LOCAL_MACHINE\Protocols\Http\IPv4Addresses\0. 0.0.0]
"SSL Keyfile"="SSL CERTIFICATEIP"

[HKEY_LOCAL_MACHINE\Protocols\Http\IPv4Addresses\0. 0.0.0\Port:81]
"SSL Enabled"=hex:"00"

[HKEY_LOCAL_MACHINE\Protocols\Http\IPv4Addresses\0. 0.0.0\Port:8008]
"SSL Enabled"=hex:"00"

[HKEY_LOCAL_MACHINE\Protocols\Http\IPv4Addresses\0. 0.0.0\Port:8009]
"SSL Enabled"=hex:"01"

My question is then, can I modify this reg file to match what the address
should be and then import it back in. Not having ever imported anything
into the Netware registry, I am not sure of the implications.

Thanks,
Tom