I had a drive failure in my RAID 5 Array. I replaced the drive and upon
completion of the rebuild I took the opportunity to restart the server.
When the server turned back on nothing is working. All I have is the
console screen and the logger screen. In the log it says that the SYS
volume couldn't mount. I can mount all my other volumes manually. I read
in several posts about replacing the RAID Card driver, but how can I
access files if I cannot use STARTX or connect from the network? All help
is appreciated.

Dell Poweredge 2600
RAID 5: 6 73GB SCSI Drives
Perc 4/Di RAID Controller
Netware 6.5 SP5