We have Novell Netware 6.5 SP5 running on Proliant blade server BL25p G1.
Everything works fine until
we installed SP6 for Novell Netware 6.5.

Now we have very big problems.

Server boots to colon prompt, volumes are not mounted. This is because all
drivers specified in startup.ncf failed to load. We did not replace drivers
during support pack install.

Now, when we try to load driver cpqraid.nlm (with SP5 works fine) we get
"No supported adapters found to activate.
Module initialization failed"

When we try to load driver ql2300.ham we get error:
"Module initialization failed"

Drivers are not loaded.

If I manually run hdetect.nlm, it does not detect any hardware devices.

I tried to delete servcfg.* files - no success
I tried to use server.exe from SP5 - no success

Any ideas ? Please help.
Roman Lenarsic