One of our customer has Netware 6.0 SP5 installed on Dell blade server
PowerEdge 1855. They are running Border Manager with 2 NIC.
They are using ce1000.lan driver version 7.34 (from SP5).

It works fine with 1 Gbit/s.
Now we want to connect public NIC to Cisco Catalyst 3750 which has only
100Mbit ports.

Problem is that setting SPEED=100, DUPLEX=FULL doesn't work. This server
works only with 1Gbit/s.

We know that same settings must be configure on both sides.

Any ideas ?
Roman Lenarsic