Netware server 6.5 SP 3

This server is my iprint and zenworks server. Today I had an IP conflict
issue with the IP of this server. This was resolved easily by tracking
down the conflict. Since then the server is running very very slow. In
Monitor it shows at 25% utilization but in iManager it shows the CPU is
stuck at 100% util. In troubleshooting via maintenence mode I have found
that when I load the NDPSM it is loading the NDPSGW MULTIPLE times. And
then my server will stop responding. Never get an abend just extremly
slow and iprint stops working.

I have the following in the syslog.err file. Not sure where to go from
here..
Any help would be appreciated!!

Thanks!

Severity = 6 Locus = 17 Class = 19
NDPS OPERATION ERROR(WO-MainOffice-HPLJ4050): The 106 operation to the
NDPSM failed.
If needed, the Error Codes explanations in the online System Messages
documentation may provide additional information about the following
return codes.
Error cod...

1-23-2007 9:05:30 am: NDPSGW-3.1-244
Severity = 6 Locus = 17 Class = 19
NDPS OPERATION ERROR(WO-MainOffice-HPLJ4050): The 106 operation to the
NDPSM failed.
If needed, the Error Codes explanations in the online System Messages
documentation may provide additional information about the following
return codes.
Error cod...

1-23-2007 9:05:42 am: NDPSGW-3.1-244
Severity = 6 Locus = 17 Class = 19
NDPS OPERATION ERROR(**Printername**-HPLJ4250n): The 106 operation to
the NDPSM failed.
If needed, the Error Codes explanations in the online System Messages
documentation may provide additional information about the following
return codes.
Error co...

1-23-2007 9:05:52 am: NDPSGW-3.1-244
Severity = 6 Locus = 17 Class = 19
NDPS OPERATION ERROR(**Printername**--HPLJ4050n): The 106 operation to
the NDPSM failed.
If needed, the Error Codes explanations in the online System Messages
documentation may provide additional information about the following
return codes.
Error co...

1-23-2007 9:06:02 am: NDPSGW-3.1-244
Severity = 6 Locus = 17 Class = 19
NDPS OPERATION ERROR(**Printername**-HPLJ4050n): The 106 operation to
the NDPSM failed.
If needed, the Error Codes explanations in the online System Messages
documentation may provide additional information about the following
return codes.
Error code: ...