I have OESsp2 Linux installed with eDir, LUM, iManager, NCP and NSS. I
have configured NSS through YaST. I have a Raid 1 system with two
logical drives, one 14GB, one 20GB. My /boot / and swap are on /dev/sda
and /dev/sdb is initialized and blank.

When I try and create an NSS Pool through iManager I get:
CIMOM error occurred: cannot write to the given file

When I try and create an NSS Pool through nssmu I get:
Write Error zERR_USER_ABORTED (20017)

Here is output from fdisk /dev/sdb
> The number of cylinders for this disk is set to 20680.
> There is nothing wrong with that, but this is larger than 1024,
> and could in certain setups cause problems with:
> 1) software that runs at boot time (e.g., old versions of LILO)
> 2) booting and partitioning software from other OSs
> (e.g., DOS FDISK, OS/2 FDISK)
> Command (m for help): p
> Disk /dev/sdb: 21.6 GB, 21684551680 bytes
> 64 heads, 32 sectors/track, 20680 cylinders
> Units = cylinders of 2048 * 512 = 1048576 bytes
> Device Boot Start End Blocks Id System
> Command (m for help):

How do I fix this issue?