Hi,

Link Aggregation issue. NW6.5 sp2, new install.
Switch on other end is a 3com 3870 with LACP enabled on relevent ports.

Intel Pro/1000 MT, dual port (CE1000).
Here are the commands that work in autoexec.ncf and work if placed in a
separate file (loadteam2.ncf) that is called from autoexec.ncf. If I
transfer to inetcfg, the teaming fails.

1. Why does it fail after having transferred to inetcfg?
2. How to make it work in inetcfg?
3. Does it matter that I'm running these commands from loadteam2.ncf?
3a. Should I make it work from inetcfg or leave it alone in loadteam2.ncf?

LOAD TCPIP
LOAD CE1000 SLOT=301 FRAME=Ethernet_II NAME=AD_1_EII
LOAD CE1000 SLOT=302 FRAME=Ethernet_II NAME=AD_2_EII
LOAD iANS FRAME=ETHERNET_II NAME=AD_TEAM_EII TEAM=2
bind iANS AD_1_EII TEAM=2
bind iANS AD_2_EII TEAM=2
LOAD iANS COMMIT MODE=AD TEAM=2
BIND IP AD_TEAM_EII ADDR=10.5.1.45 MASK=255.255.0.0