I had the primary drive fail in mirrored NSS array. I set the DOS partition
active on the second drive and changed its SCSI ID to 0. When I boot up and
try to mount the SYS volume, I get the message that it cannot be mounted
because "some or all volume segments cannot be located". In the past (i.e.,
previous versions of Netware) I was able to load nwconfig and break the
mirror, then mount the drive. Unfortunately, this functionality has been
removed and you must use ConsoleOne to do this. The catch is that since I
can't mount sys, I can't load ConsoleOne. Can anyone please assist me.

Patrick McKane