HP DL380G2
Dual processor system - no hyperthreading
Netware 6.5 SP6
Running NDPS/iPrint

I have noticed that on all my servers (but this one in particular)
have DS.NLM loaded, but none of the mulitprocessor boxes use DS.NLM on
Processor 1. I was under the impression that Netware 6.5 SMP was
fully multiprocessor aware, and would properly use both processors.

I periodically see spikes in CPU usage, where DS runs hot (50%+ of the
CPU), but according to NoRM, uses only Processor 0. Even when
Processor 0 maxes at 100%, Processor 1 is running at 1% max.

Execution Profile Data by NLM
NLM Name NLM Description Execution Time Processor 0 Processor 1
DS.NLM Novell eDirectory Version 8.7.3.9 SMP 42.4 % 100.0 % 0.0 %
SERVER.NLM NetWare Server Operating System 39.3 % 15.1 % 84.9 %
LSL.NLM Novell NetWare Link Support Layer 12.1 % 1.7 % 98.3 %
MSM.NLM Novell Multi-Processor Media Support Module 1.2 % 0.0 %
100.0 %
LOADER.NLM NetWare OS Loader 0.4 % 100.0 % 0.0 %
TCP.NLM Novell TCP/IP Stack - Transport module (NULL encryption) 0.4
% 100.0 % 0.0 %
MM.NLM NetWare 6.5 Media Manager 0.2 % 0.0 % 100.0 %
MAL.NSS NSS Media Access Layer (MAL) (Build 632 MP) 0.2 % 0.0 %
100.0 %
NCP.NLM NetWare Core Protocol (NCP) Engine 0.2 % 100.0 % 0.0 %
TCPIP.NLM Novell TCP/IP Stack - Network module (NULL encryption) 0.2
% 100.0 % 0.0 %
SEG.NLM NetWare Memory Analyzer 0.2 % 100.0 % 0.0 %

Is there any way to get DS.NLM to load balance the processors?

Thanks
Rob