I'm trying to get a new Proliant DL360 G4 with 2 SATA drives configured for
Raid 1, mirroring with Netware 6.5. I've got an LSI MegaRaid 150-4
controller card with the drives plugged into it. Booting the server I
configured the drives with the MegaRaid BIOS app. When I boot the Netware cd
to start the install I get a message that says there is no DOS
partition/drive so it can't continue. I have the appropriate driver file but
I don't seem to get to the point when the installation asks me for them. I
did a similar Proliant with Win 2003 server and I was asked for the driver
file for the raid controller and all was fine. How do I get to this point
with Netware?