Hi,

Ive jsut setup a new server using nw 6.5 sp3, and have teamed the two
network cards for fault tolerance: Below is the details of the
load/bind commands in the autoexec.ncf
LOAD ODINEB.NLM
LOAD TCPIP
LOAD QASP.LAN FRAME=ETHERNET_II NAME=TEAM1 VSLOT=1
LOAD BMAPI.NLM
LOAD Q57.LAN FRAME=ETHERNET_II SLOT=10017 NAME=Q57_1_EII SPEED=1000FD
LOAD Q57.LAN FRAME=ETHERNET_II SLOT=10018 NAME=Q57_2_EII SPEED=1000FD
QASP BIND TEAM1 Q57_1_EII
QASP BIND TEAM1 Q57_2_EII STANDBY
BIND IP TEAM1 ADDR=10.1.1.16 MASK=255.255.255.0 GATE=10.1.1.1

Everything starts ok, and the server communicates as it should do, but
when i check the hp advanced server program console, it shows the
primary link as "down" If i unplug the secondary link cable, which is
active, and then re-plug it in, communications are not
re-established...

any thoughts would be appreciated..

Regards


--
peterhughes_halliwells