After upgrading novell 6 with servicepack 5 i get the following error.
Would you like to load an additional frame type for the previously
loaded?

this is from the autoexec.ncf....

#LOAD TCPIP
#LOAD CE1000.LAN SLOT=4 FRAME=ETHERNET_II NAME=CE1000_1_EII
#BIND IP CE1000_1_EII addr=172.20.71.252 mask=255.255.0.0
#LOAD CE1000.LAN SLOT=10018 FRAME=ETHERNET_II NAME=CE1000_2_EII
#BIND IP CE1000_2_EII addr=10.0.0.1 mask=255.0.0.0 gate=10.0.0.138 #LOAD
CE1000.LAN SLOT=10019 FRAME=ETHERNET_II NAME=CE1000_3_EII
#BIND IP CE1000_3_EII addr=172.20.70.252 mask=255.255.255.0


this is my netinfo.cfg file


#!SERVERTYPE=NORMAL
#!
#!UIMODE=NORMAL
#!
#!BEGINGENLOAD
LOAD SNMP
LOAD BCALLSRV
#!END
#!
#!BEGINTSMLOAD
#!END
#!
#!BEGINBOARD DRVR=CE1000 NAME=CE1000_1 STATUS=ENABLED NUMPORTS=1
DRVRTYPE=LAN VARIABLEPORTS=NO PORTPARAM=CHANNEL SLOT=4
#Transferred from AUTOEXEC.NCF
#!BEGINPORT NAME=CE1000_1 NUMBER=1 STATUS=ENABLED FRAMES=YES NUMLINKS=1
MEDIA=EtherTsm WANFRAME=UNCONFIGURED
#Transferred from AUTOEXEC.NCF
#!REFCOUNT=1
LOAD CE1000 NAME=CE1000_1_EII FRAME=ETHERNET_II SLOT=4
#!END
#!END
#!
#!BEGINBOARD DRVR=CE1000 NAME=CE1000_2 STATUS=ENABLED NUMPORTS=1
DRVRTYPE=LAN VARIABLEPORTS=NO PORTPARAM=CHANNEL SLOT=10018
#Transferred from AUTOEXEC.NCF
#!BEGINPORT NAME=CE1000_2 NUMBER=1 STATUS=ENABLED FRAMES=YES NUMLINKS=1
MEDIA=EtherTsm WANFRAME=UNCONFIGURED
#Transferred from AUTOEXEC.NCF
#!REFCOUNT=1
LOAD CE1000 NAME=CE1000_2_EII FRAME=ETHERNET_II SLOT=10018
#!END
#!END
#!
#!BEGINBOARD DRVR=CE1000 NAME=CE1000_3 STATUS=ENABLED NUMPORTS=1
DRVRTYPE=LAN VARIABLEPORTS=NO PORTPARAM=CHANNEL SLOT=10019
#Transferred from AUTOEXEC.NCF
#!BEGINPORT NAME=CE1000_3 NUMBER=1 STATUS=ENABLED FRAMES=YES NUMLINKS=1
MEDIA=EtherTsm WANFRAME=UNCONFIGURED
#Transferred from AUTOEXEC.NCF
#!REFCOUNT=1
LOAD CE1000 NAME=CE1000_3_EII FRAME=Ethernet_II SLOT=10019
#!END
#!END
#!
#!BEGINPROTO PROTO=TCPIP STATUS=ENABLED
LOAD TCPIP
#Transferred from AUTOEXEC.NCF
#!BEGINBIND STATUS=ENABLED
BIND IP CE1000_1_EII MASK=255.255.0.0 ADDRESS=172.20.70.252
#172.20.70.252
#!END
#!BEGINBIND STATUS=ENABLED
BIND IP CE1000_2_EII ARP=Yes Mask=255.0.0.0 Address=10.0.0.1
#10.0.0.1
#!END
#!BEGINBIND STATUS=ENABLED
BIND IP CE1000_3_EII ARP=Yes Mask=255.255.255.0 Address=172.20.71.252
#172.20.71.252

thanks,

a desperate newbie.