Tree consists of 1 x NW65SP4a server, 2 x OES_SP1 server. First 2 servers
removal of DS went fine (previously was NetWare 6.0 SP5), 3rd and final
server, removal of DS (NetWare 6.0 SP5), removed all associated objects in
NWADMIN. Fresh install of OES_SP1 overlay, all went fine except when it
comes to installing Certificates, had an error I couldn't get pass so I had
to go on without installing certificates. Server comes up, no Apache is
loaded, can't use iManager to install license or other duties. Run PKIDiag
2.78 over the server, see below;

---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 11:33:20 2005
User logged-in as: admin.fechs.
Fixing mode
Rename and create mode
Rename and create when necessary

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 11:34:00 2005
User logged-in as: admin.fechs.
Fixing mode
Rekey mode
Re-key when necessary

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 11:35:17 2005
User logged-in as: admin.fechs.
Fixing mode
Rename and create mode
Always Re-key

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 12:02:58 2005
User logged-in as: admin.fechs.
Fixing mode
Rekey mode
Always Re-key

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 12:11:39 2005
User logged-in as: Admin.fechs.
Fixing mode
Rekey mode
Re-key when necessary

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 12:12:53 2005
User logged-in as: admin.fechs.
Fixing mode
Rekey mode
Always Re-key

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Step 1 failed -601.

Step 2 Verifying the SAS Service Object
PROBLEM: A SAS Service object was not found.
FIX: Successfully created and linked SAS Service object 'SAS Service -
FECHS1.Services.FECHS' to 'FECHS1.Services.FECHS'.
PROBLEM: SAS Service object 'SAS Service - FECHS1.Services.FECHS' does not
have Read All Attribute rights to itself.'
Fix -->Successfully gave rights to the SAS Service object.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 3
Problems fixed: 2
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 12:14:07 2005
User logged-in as: admin.fechs.
Fixing mode
Rekey mode
Always Re-key

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 12:22:07 2005
User logged-in as: admin.fechs.
Fixing mode
Rekey mode
Re-key when necessary

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 12:22:24 2005
User logged-in as: admin.fechs.
Fixing mode
Rekey mode
Always Re-key

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 12:22:36 2005
User logged-in as: admin.fechs.
Fixing mode
Rename and create mode
Rename and create when necessary

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 12:22:47 2005
User logged-in as: admin.fechs.
Fixing mode
Rename and create mode
Always Re-key

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0

Multiple restarts, can't seem to get Apache loaded, or even manually
installing the Certificates in C1. Desperate times as I have a couple days
left before this client needs me out and I still need to put on ZENworks 7
and configure it as well as DHCP and iPrint.