I upgraded my Netware 6.5 SP2 box to SP4a. This box has a QLogic 2340
HBA in it attached to a Dell | EMC SAN (CX200) with PowerPath 3.0.3
installed. During the install process I told it not to update the LAN
and Storage drivers. After the install successfully finished, on
reboot, it hung at scanning for paritions for 15 minutes. This thing
only has 3 NSS Volumes that is serves including SYS. SYS is on a local
SCSI RAID 1 disks, the other two are on my SAN. After the 15 minutes it
loads up fine and sees everything including the volumes in the SAN.
Performance seems to be fine otherwise. Any advice would be greatly