When running the upgrade from NW65 SP 2 to NW65SP4a, at the end of the
upgrade process I received the following Error:

File or Directory "SYS:\JAVA\LIB\EXT\MYSQL-CONNECTOR-JAVA-*. JAR" cannot
be removed. ERROR: error code 142 (8E Hex). ICMD-5.0-B)
Press Enter to Continue.

Once I did the Upgrade appeared to finish and the server rebooted. NOw
after it mounts all the volumes it continually restarts. There is a
message that flashes up just for a split second, but I can't see what it
is saying.

Is there a way to find out what the problem is without having to restore
the sys volumne from backup and starting over??

The autoexec.ncf looks like this:

SEARCH ADD SYS:\ni\update\bin

#The Support Pack install has moved timesync configuration to
sys:\system\timesync.cfg

SET CLIENT FILE CACHING ENABLED = OFF
;NEXT LINE ADDED 6-21-05 BY BOB
SET LEVEL 2 OPLOCKS ENABLED = OFF
SET END OF DAYLIGHT SAVINGS TIME = (OCTOBER SUNDAY LAST 2:00:00 AM)
SET END OF DAYLIGHT SAVINGS TIME = (OCTOBER SUNDAY LAST 2:00:00 AM)
; THE FOLLOWING LINES WERE MOVED OR ADDED BY THE NETWARE SUPPORT PACK
; THE SET MAXIMUM CONCURRENT DISK CACHE WRITES MODIFIED
; FROM 500 TO 750 BY BOB 6-21-05
SET MAXIMUM CONCURRENT DISK CACHE WRITES = 750
; THE SET DIRTY DISK CACHE DELAY TIME CHANGED FROM 0.5 TO 0.1
; BY BOB 6-21-05
SET DIRTY DISK CACHE DELAY TIME = 0.1
SET MAXIMUM CONCURRENT DIRECTORY CACHE WRITES = 100
; END OF MODIFICATIONS MADE BY NETWARE SUPPORT PACK INSTALLATION

SET TIME ZONE = CST6CDT
SET DAYLIGHT SAVINGS TIME OFFSET = 1:00:00
SET START OF DAYLIGHT SAVINGS TIME = (APRIL SUNDAY FIRST 2:00:00 AM)
SET END OF DAYLIGHT SAVINGS TIME = (OCTOBER SUNDAY LAST 2:00:00 AM)
;(COMMENTED OUT BY INSTALL...) SET DEFAULT TIME SERVER TYPE = SINGLE
# Note: The Time zone information mentioned above
# should always precede the SERVER name.

SET BINDERY CONTEXT = OU=XXXX.O=XXXX

# Note: The Time zone information mentioned above
# should always precede the SERVER name.
SEARCH ADD SYS:\JAVA\BIN
SEARCH ADD SYS:\JAVA\NWGFX\BIN
SEARCH ADD SYS:\JAVA\NJCLV2\BIN

FILE SERVER NAME XXXX
LOAD CONLOG MAXIMUM=100
SERVERID ###
; Network driver LOADs and BINDs are initiated via
; INITSYS.NCF. The actual LOAD and BIND commands
; are contained in INITSYS.NCF and NETINFO.CFG.
; These files are in SYS:ETC.
sys:etc\initsys.ncf

search add sys:\system\hp400
search add sys:\system\hostprt
SEARCH ADD SYS:SYSTEM\NWSAA
search add sys:system\commexec

set MAXIMUM PACKET RECEIVE BUFFERS=5000
; NEXT LINE REMARKED OUT BY BOB 6-20-05
; set MAXIMUM ALLOC SHORT TERM MEMORY=10000000


load BOOTPFWD SERVER=xxx.xxx.xxx.xxx
LOAD AFREECON.NLM
#load remote XXXX
;#load rspx
load sys:mcafee\netshld\netshld
netshld.ncf



CPQSNMP
load MONITOR
SET Compression Daily Check Starting Hour = 23
SET Compression Daily Check Stop Hour = 23
SET Days Untouched Before Compression = 7
SET New Packet Receive Buffer Wait Time = 0.1
; NEXT LINE CHANGED FROM 2000 TO 10000 BY BOB 6-21-05
SET Maximum Directory Cache Buffers = 10000
; NEXT LINE CHANGED FROM 800 TO 5000 BY BOB 6-21-05
SET Minimum Directory Cache Buffers = 5000
; NEXT LINE CHANGE FROM 300 TO 60 BY BOB 6-21-05
SET CPU Hog Timeout Amount = 60
; NEXT LINE CHANGE FROM ON TO OFF BY BOB 6-21-05
SET Upgrade Low Priority Threads = OFF
SET Reply To Get Nearest Server = Off
; NEXT LINE CHANGED FROM 1000 TO 2000 BY BOB 6-21-05
SET Maximum Service Processes = 2000
SET Maximum Record Locks Per Connection = 1000
SET Maximum File Locks Per Connection = 750
SET Maximum Record Locks = 40000
SET Maximum File Locks = 20000
;mount all
mount sys
IPMINIT.NCF
;STARTX
;SYS:\SYSTEM\NMA\NMA5.NCF
load nile.nlm
load httpstk.nlm /SSL /keyfile:"SSL CertificateIP"
LOAD NICISDI.XLM s
LOAD SASDFM.XLM
LOAD SAS.NLM

LOAD RCONAG6 XXXXX 2034 16800 2036
LOAD BROKER "XXXXX.XXXX.XXXX"
LOAD NDPSM .XXXXpm.XXXX.XXXX

NWAGENT

SEARCH ADD SYS:JAVA\NJCLV2\BIN

LOAD SCRSAVER ENABLE; NO PASSWORD; DELAY=300

BSTART.NCF
LOAD PORTAL.NLM
LOAD PKI.NLM
SEARCH ADD SYS:\APACHE2


#ACCESS TO XTIER SOFTWARE
SEARCH ADD SYS:\XTIER
LOAD NCPL

AP2WEBUP
#Apache2 is now the admin server
ADMSRVUP
SEARCH ADD SYS:/tomcat/4/bin
#Added By FTP Server
ftpstart.ncf
#Added By FTP Server END
# tc4admin begin
load perl.nlm
tcadmup.ncf
# tc4admin end
LOAD WTM.NLM
# tomcat4 begin
sys:/tomcat/4/bin/tomcat4.ncf
# tomcat4 end
LOAD EMBOX.NLM
# -- Added by Nsure Auditing Install --
;AUDITSVR.NCF
;AUDITAGT.NCF
# -- End of Nsure Auditing Install --
; NEXT TWO LINES ARE DUPLICATES FROM ABOVE REMARKED OUT BY BOB
;#Added By FTP Server
; ftpstart.ncf
#Added By FTP Server END
# -- Added by MYSQL Install --
SEARCH ADD SYS:\mysql\bin
#mysqld_safe --autoclose
# -- End of MYSQL Install --
;ZENworks Database Settings
;ZENworks Database Settings
mgmtdbs.ncf
;ZENworks Inventory Settings
StartInv.ncf
zfdstart.ncf
#SEARCH ADD SYS:\zenworks\OnDemand\bin
#UsageServer.ncf
#CommerceMaintenance.ncf

SEARCH ADD SYS:system

?SYS:system\GWTSA.NCF

?SYS:\system\gwia.ncf

?SYS:\system\grpwise.ncf

?SYS:\GWAVASIG\GWAVASIG

LOAD CPQHLTH
LOAD CPQCI