The new server has been in service since last thursday and seems to have
a very strange issue. If you send files to the server they are quite
slow to send, however if you pull files from the server they fly off of
there like the blazes.

Hardware specs:

Asus P5WDG2-WS (2x64 bit PCI slots, 2x1GB On board Nic, 2x32 bit PCI
slots 2x16xAGP)
Installed cards are:
Adaptek 29160 dual scsi controller
1x15000K 72GB Fujitsu SCSI HD
2x1GB RAM
1x32 Bit PCI video (generic card)
1x1GB Intel Nic (unable to get novell to play nice with the onboard
nics).

I'm not sure if this is needed, but it may be of some help (netinfo.cfg)


Print #33, "FATALPROVERROR1#-" & red & Text5 & nored & " has an invalid
Province code (" & red & Text1 & nored & ")" & br & "MUST be ONLY B.C.
or AB or WA" & br


Asus P5WDG2-WS (2x64 bit PCI slots, 2x1GB On board Nic, 2x32 bit PCI
slots 2x16xAGP
Installed cards are:
Adaptek 29160 dual scsi controller
1x15000K 72GB Fujitsu SCSI HD
2x1GB RAM
1x32 Bit PCI video (generic card)
1x1GB Intel Nic (unable to get novell to play nice with the onboard
nics).


#!SERVERTYPE=NORMAL
#!
#!UIMODE=NORMAL
#!
#!BEGINGENLOAD
LOAD SNMP
LOAD BCALLSRV
#!END
#!
#!BEGINTSMLOAD
#!END
#!
#!BEGINBOARD DRVR=E1000 NAME=E1000_1 STATUS=ENABLED NUMPORTS=1
DRVRTYPE=LAN VARIABLEPORTS=NO PORTPARAM=CHANNEL SLOT=2
#Transferred from AUTOEXEC.NCF
#!BEGINPORT NAME=E1000_1 NUMBER=1 STATUS=ENABLED FRAMES=YES NUMLINKS=1
MEDIA=EtherTsm WANFRAME=UNCONFIGURED
#Transferred from AUTOEXEC.NCF
#!REFCOUNT=1
LOAD E1000 NAME=E1000_1_E83 FRAME=ETHERNET_802.3 SLOT=2
#!REFCOUNT=1
LOAD E1000 NAME=E1000_1_EII FRAME=Ethernet_II SLOT=2
#!REFCOUNT=1
LOAD E1000 NAME=E1000_1_E82 FRAME=Ethernet_802.2 SLOT=2
#!END
#!END
#!
#!BEGINPROTO PROTO=TCPIP STATUS=ENABLED
LOAD TCPIP
#Transferred from AUTOEXEC.NCF
#!BEGINBIND STATUS=ENABLED
BIND IP E1000_1_EII ARP=Yes Mask=255.255.255.0 Address=10.0.0.40
#10.0.0.40
#!END
#!END
#!
#!BEGINPROTO PROTO=IPX STATUS=ENABLED
LOAD IPXRTR
#Transferred from AUTOEXEC.NCF
LOAD IPXRTRNM
#Transferred from AUTOEXEC.NCF
#!BEGINBIND STATUS=ENABLED
BIND IPX E1000_1_E83 NET=DABEA6FB
#DABEA6FB
#!END
#!BEGINBIND STATUS=ENABLED
BIND IPX E1000_1_E82 net=00000004 seq=1
#00000004
#!END
#!END
#!
#!BEGINPROTO PROTO=APPLETLK STATUS=DISABLED
#:LOAD LLC8022
#
#:LOAD AppleTlk zfile=Yes
#
#:LOAD adsp
#
#!END
#!
#!BEGINPROTO PROTO=SRBRIDGE STATUS=DISABLED
#:LOAD BRIDGE BN=1 VRN=OFF ARL=8 STP=IEEE SBP=0x8000 SRL=8 G=SRB BTS=250
#
#:LOAD BRGLANM PS=ON EM=ON CRS=ON PW0=00000000 PW1=00000000 PW2=00000000
PW3=00000000
#
#!END
#!
#!BEGINREMOTE
LOAD REMOTE **********
LOAD RSPX
LOAD XCONSOLE session=6 esctimeout=500
#!END

Also, for the life of me i can not remember how to edit this file via
inetcfg - someone refresh me memory :)

Thanks!

Jim

--
Jim Hamilton
Network Administrator
818 Broughton St.
Office: 250-480-3212
Cel: 250-888-3564

Help Fight Viri and Scumware! Stop using Outlook & Internet Exploder!!