I have an HP lp2000r server with a HP NetRaid 1M Controller.
The server was running Netware 6.5 SP3 and was running fine.

I applied SP5 and everything went fine until it rebooted.

After reboot, the MEGA4_XX.HAM driver had an INIT FAIL.

I flashed the BIOS and Firmware of the 1M Controller, hoping this would
help the new driver function properly. Instead, HDETECT no longer even
tries to load the MEGA4_XX.HAM driver.

I cannot remove the SP5 install because the SYS volume is not mounted due
to this driver failing.

Does anyone have any suggestions?