We are setting up a simple iscsi san for a two node cluster. All NW65SP5

We are connecting the nodes to the iscsi target using dedicated nic's with
crossover cables. We would like some fault tolerance (and if possible load
balancing) on the connections i.e. 2 dedicated connections between each
node and the target.

At present we are simply using Novell's IP FT/LB via inetcfg, but are
experiencing issues...

Does the Novell solution rely on some sort of arp information that isn't
available using crossover cables direct to onboard nics? Do we have to use
a switch?

Any suggestions welcome!

Many thanks