Hello,
We have a
HP DL145 G2 Server
2 Dual-Core AMD 275 Opteron Processors
4GB RAM DDR1-PC3200
2-250 GB SATA HDDS RAID1 on 8-Port Internal SAS HP/LSI-LOGIC PCI-X
Dual Broadcom 57xx Nics

We are having trouble with the Platform Support Module. During the install
if you leave the default ACPIDRV.PSM driver selected. After the first reboot
of the server it will hang loading the ACPIDRV.PSM. If we edit the
startup.ncf and change the entry from:

LOAD ACPIDRV.PSM
to
LOAD MPS14.PSM

It will load just fine and you can see 4 processors come online in the
logger screen as well as in "monitor".

However we look in NORM>Profile/Debug>Profile CPU Execution by NLM. A
message gets diplayed that "This processor doesn't support dynamic execution
profiling. This requires at least a Pentium Pro processor as well as APIC
support."

Does this mean we are losing performance?

We looked at TID 10098673 and edited the Startup.ncf to:

LOAD ACPIDRV.PSM -fb

But it did not help. Did we not add the parameter option correctly?

Thanks
Mike