Hi,

I performed an inplace upgrade from NW6.0 SP5 to NW6.5. After the upgrade
completes, it reboots but, HWDETECT fails. The NW partition (SYS) on my IDE
drive isn't availabe because the drive isn't recognized (UNBOUND DEVICE).
I manually loaded the IDEATA.HAM, and set the port and int. The IDEDHD.CDM
loads okay too. But the device is still UNBOUND??? How can I get it to
bind?

The hd also contains my DOS partion which NW6.5 sees (LFVOLUME).

Any Thoughts?
Thanks,
Brent