Trying to upgrade a ML530 server by adding an Adaptec 29320 controller card
for a second disk.

After inserting the card and trying to boot, (it doesn't boot) the BIOS sees
the new SCSI card and a disk attached, but won't boot from the original
smart array controller with DOS/NW partition - even though it is first on
the boot controller list.

The error is 'invalid partition table'.

What is strange is that the new disk (on the 320 card) was an existing disk
from an embedded 29160 controller card - but I'd like to get better
throughput with the 320 card.

Do I have to move the PCI-X cards around so that the smart array is seen