In order to share the load on the network from various areas of the
company, I have installed Netware 6.5 with three NICs addressed as
NIC1 - Mask =
NIC2 - Mask =
NIC3 - Mask =

Note: Each NIC connects to a Gigabit Non-Managed switch

The problem is that I cannot ping any NIC or workstation outside of my
own subnet.

It is my understanding that for IP based consoles (such as Backup Exec,
iPRINT, etc.) I have to be able to see the other networks.

I have banged my head against the wall on this one and it is about time
for me to swallow my pride and ask for help. HELP

Any assistance that someone might be able to provide would be greatly

Greg Campbell