I run a NetWare installation with the parameter
[inst: image]
After completing the installation i saved c:\nwinst.tmp\response.tmp
and made an image of the server.
if i run a new installation with this response file the system allways
tells me that the driver for the storage adapter 1 and so on cannot be
found. If i enter the same LOAD commands like in the response.tmp
manually the driver are loaded correctly.

[NWI:Storage Adapter 1]
Touched=TRUE
Driver File=IDEATA.HAM
Driver Name=IDEATA
File Type=HAM
Device Name=Standard~ATA/IDE/ATAPI Adapter
SLOT=10004
EnableInfo=No
EnableBreak=No
ForceLegacyISA=Disabled
Driver Description 1=Novell IDE/ATA/ATAPI Host Adapter Module
Load Line=LOAD IDEATA.HAM SLOT=10004

[NWI:Storage Adapter 2]
Touched=TRUE
Driver File=LSIMPTNW.HAM
Driver Name=LSI_NWPA_1INT_IO_SCSI_HAM_LsiMptNw
File Type=HAM
Device Name=LSI Logic~SC1030
SLOT=2
Qtags=On
MinTimeout=0
Wide=On
Sync=160
ElevatorThreshold=32
Verbose=Off
Events=On
Driver Description 1=LSI Common Arch. NWPA HAM Driver
(LsiMptNw-4.00.05.00 )
Load Line=LOAD LSIMPTNW.HAM SLOT=2


--