I just installed NW6.5SP6 on a Dell PowerEdge 2900 with dual embedded
Broadcom 8708.

I have tried to follow the Broadcom instructions for modifying AUTOEXEC.NCF,
but nothing would function.

I tried the second approach of usinf INETCFG, and I was able to get IP
working, but not IPX; even more confusing, IP would only work when both NICs
were connected to the Dell PowerConnect switch, but when I unplugged one
cable, I was no longer able to ping anything.

If you have a chance, please look at my AUTOEXEC.NCF file and let me know if
there's anything that look out of place.

M.S.

-----------------------------------

set Bindery Context = O=REDWOOD_CITY
SET Daylight Savings Time Offset = 1:00:00
SET Start Of Daylight Savings Time = (MARCH SUNDAY SECOND 2:00:00 AM)
SET End Of Daylight Savings Time = (NOVEMBER SUNDAY FIRST 2:00:00 AM)
SET Time Zone = PST8PDT


# Note: The Time zone information mentioned above
# should always precede the SERVER name.
SEARCH ADD SYS:\JAVA\BIN
SEARCH ADD SYS:\JAVA\NWGFX\BIN
SEARCH ADD SYS:\JAVA\NJCLV2\BIN
SEARCH ADD SYS:\NI\UPDATE\BIN
# WARNING!!
FILE SERVER NAME REDWOOD_CITY_1
# WARNING!!
# If you change the name of this server, you must update
# the server name in all the licenses that are assigned
# to it using iManager.
LOAD CONLOG MAXIMUM=100
#
LOAD IPXRTR
LOAD IPXRTRNM
#
LOAD BASP.LAN FRAME=ETHERNET_II NAME=BASP_1_EII VSLOT=1 MODE=SLB
#
LOAD ODINEB.NLM
LOAD TCPIP
#
LOAD BX2.LAN SLOT=10028 FRAME=ETHERNET_II NAME=BX2_1_EII
LOAD BX2.LAN SLOT=10034 FRAME=ETHERNET_II NAME=BX2_2_EII
#
BASP BIND BASP_1_EII NAME=BX2_1_EII
BASP BIND BASP_1_EII NAME=BX2_2_EII
#
BIND IP BASP_1_EII addr=192.168.0.150 mask=255.255.255.0 gate=192.168.0.1
#
LOAD BASP.LAN FRAME=ETHERNET_802.2 NAME=BASP_1_E82 VSLOT=1 MODE=SLB
#
LOAD BX2.LAN FRAME=ETHERNET_802.2 NAME=BX2_1_E82 SLOT=10028
LOAD BX2.LAN FRAME=ETHERNET_802.2 NAME=BX2_2_E82 SLOT=10034
#
BIND IPX BASP_1_E82 NET=F501E82
#
LOAD IPXRTRNM
#
MOUNT ALL
IPMINIT.NCF
#
SYS:\SYSTEM\NMA\NMA5.NCF
BSTART.NCF
load nile.nlm
load httpstk.nlm /SSL /keyfile:"SSL CertificateIP"
LOAD PORTAL.NLM
LOAD NDSIMON.NLM
LOAD NICISDI.XLM
LOAD SASDFM.XLM
# -- Added by AFP Install --
AFPSTRT.NCF
# -- End of AFP Install --
# -- Added by CIFS Install --
CIFSSTRT.NCF
# -- End of CIFS Install --
SYS:/BIN/UNIXENV.NCF
LOAD PKI.NLM
LOAD NLDAP.NLM
# -- Added by Scripting Install --
SCRIPT.NCF
SEARCH ADD SYS:\APACHE2
#Apache2 is now the admin server
ADMSRVUP
# tc4admin begin
SEARCH ADD SYS:/tomcat/4/bin
tcadmup.ncf
# tc4admin end
# Storage Management Services components required for Backup
SMSSTART.NCF
#---Added By Native File Access For Unix---
nfsstart
#---Added By Native File Access For Unix END---
LOAD EMBOX.NLM
openwbem.ncf
#RCONAG6.NLM is required by RConsoleJ
#LOAD SPXS

?STARTX
SET CLIENT FILE CACHING ENABLED=OFF
LOAD MONITOR