NW6.0-SP5 + NW6NSS5C + TSA5UP18 with BE 9.1.1158.4 with OFM
9.4.01M (latest patch)

Backup-jobs to tape run fine and also a backup of one
W2K-workstation, which is done to disk, does not cause any
problems.

Now I added an additional nss-volume to the
media-/backup-server called BAK: (located in a pool also
called BAK). To this volume on a regular basis specific data
gets backuped with BE as backup-to-disk and while it
basically runs through (there are some SMS-errors but I will
work on this at a later point) at some point there happen
nss-errors. I will place the buffer of the logger-screen
below. For me the process of activation/deactivation of
several pools/volume looks normal (I am used to this!). New
is, that there are extra nss-errors together with a message
to all logged in users in the lan. Can anybody point me to
the source of the problem?

Sincerely

Karl

Loading module OFMCDM.CDM

Open File Manager(TM) CDM

Version 94.01.13 11 August 2005

Copyright (C) 2002-2005 St. Bernard Software - All Rights
Reserved
Auto-Loading Module OFMHAM.HAM

Auto-loading module OFMHAM.HAM

Open File Manager(TM) HAM

Version 94.01.13 11 August 2005

Copyright (C) 2002-2005 St. Bernard Software - All Rights
Reserved
Module OFMHAM.HAM load status OK

Module OFMCDM.CDM load status OK



Module OFM.NLM loaded

Loading module JAVA.NLM

This module is ALREADY loaded and cannot be loaded more
than once.
Module JAVA.NLM load status NOT MULTIPLE

OfmHam: 11/02/05 18:59:10 Created device 0

OfmHam: 11/02/05 18:59:10 Created device 1

OfmHam: 11/02/05 18:59:10 Created device 2

OfmHam: 11/02/05 18:59:10 Created device 3

OfmHam: 11/02/05 18:59:10 Created device 4

OFMCDM: 11/02/05 18:59:26 Creating snapshot pool 'BAK_SP'
PartID=3a
Loading pool "BAK_SP"

Operational Mode 0

Activating pool "BAK_SP"...

** Pool layout v40.08

** Previous clean shutdown detected (consistency check OK)

** Loading system objects

** Processing volume purge log

** .

** Processing pool purge log

** .

Loading volume "BAK_SV"

Cleaning up partial rename (or snapshot) of "BAK_SV" volume

Volume BAK_SV set to the DEACTIVE state.

Pool BAK_SP set to the ACTIVE state.

OFMCDM: 11/02/05 18:59:27 Snapshot pool 'BAK_SP' created

Pool BAK_SP is already in the ACTIVE state.

Activating volume "BAK_SV"...

** Volume layout v35.00

** Volume creation layout v35.00

** Processing volume purge log

** .

Volume BAK_SV set to the ACTIVE state.

OFMCDM: 11/02/05 18:59:27 Creating snapshot pool 'IVM_SP'
PartID=36
Loading pool "IVM_SP"

Operational Mode 0

Activating pool "IVM_SP"...

** Pool layout v40.08

** Processing journal

** 0 uncommitted transaction(s)

** 0 Redo(s), 0 Undo(s), 0 Logical Undo(s)

** System verification completed

** Loading system objects

** Processing volume purge log

** .

** Processing pool purge log

** .

Loading volume "IVM_SV"

Cleaning up partial rename (or snapshot) of "IVM_SV" volume

Volume IVM_SV set to the DEACTIVE state.

Pool IVM_SP set to the ACTIVE state.

OFMCDM: 11/02/05 18:59:28 Snapshot pool 'IVM_SP' created

Pool IVM_SP is already in the ACTIVE state.

Activating volume "IVM_SV"...

** Volume layout v35.00

** Volume creation layout v35.00

** Processing volume purge log

** ........

Volume IVM_SV set to the ACTIVE state.

OFMCDM: 11/02/05 18:59:28 Creating snapshot pool 'SYS_SP'
PartID=32
Loading pool "SYS_SP"

Operational Mode 0

Activating pool "SYS_SP"...

** Pool layout v40.08

** Processing journal

** 0 uncommitted transaction(s)

** 0 Redo(s), 0 Undo(s), 0 Logical Undo(s)

** System verification completed

** Loading system objects

** Processing volume purge log

** .

** Processing pool purge log

** .

Loading volume "SYS_SV"

Cleaning up partial rename (or snapshot) of "SYS_SV" volume

Volume SYS_SV set to the DEACTIVE state.

Pool SYS_SP set to the ACTIVE state.

OFMCDM: 11/02/05 18:59:29 Snapshot pool 'SYS_SP' created

Pool SYS_SP is already in the ACTIVE state.

Activating volume "SYS_SV"...

** Volume layout v35.00

** Volume creation layout v35.00

** Processing volume purge log

** ...

Volume SYS_SV set to the ACTIVE state.

Deactivating pool "BAK_SP"...

Deactivating volume "BAK_SV"...



2 Nov 2005 19.22.27 NSS<COMN>-3.05-xxxx:
comnPool.c[2534]
Pool BAK_SP: System data I/O error 20204(zio.c[1895]).

Block 6723701(file block -6723701)(ZID 2183)





2 Nov 2005 19.22.27 NSS<COMN>-3.05-xxxx: comnVol.c[7863]

Volume BAK_SV: System data I/O error 20204(zio.c[1895]).

Block 6723701(file block -6723701)(ZID 2183)



Pool BAK_SP set to the DEACTIVE state.

OFMCDM: 11/02/05 19:22:31 Deleting snapshot pool 'BAK_SP'

Deactivating pool "IVM_SP"...

Deactivating volume "IVM_SV"...

Pool IVM_SP set to the DEACTIVE state.

OFMCDM: 11/02/05 19:22:31 Deleting snapshot pool 'IVM_SP'

Deactivating pool "SYS_SP"...

Deactivating volume "SYS_SV"...

Pool SYS_SP set to the DEACTIVE state.

OFMCDM: 11/02/05 19:22:32 Deleting snapshot pool 'SYS_SP'