Hi,

I hope that you could help me, because since installation of my new
Groupwise 6.0 SP4 server under Netware 6.5 SP4 i could never execute a
backup job!!!

The machine is a Dell Poweredge 2850 with Seagate-DAT72, attached to an
Adaptec 29160 adapter.

My startup.ncf file:

LOAD ACPIDRV.PSM
######## End PSM Drivers ########
LOAD IDECD.CDM
LOAD NWTAPE.CDM
LOAD NWASPI.CDM
LOAD SCSIHD.CDM
LOAD BAKPLANE.CDM
LOAD IDEMO.CDM
######## End CDM Drivers ########
LOAD IDEATA.HAM SLOT=10012
LOAD PEDGE3.HAM SLOT=10015
LOAD ADPT160M.HAM /luns SLOT=301
LOAD ADPT160M.HAM /luns SLOT=302
LOAD IDEATA.HAM SLOT=10025
######## End HAM Drivers ########

when i run the list devices comand at server console, i get the
following:
0x0001: [V024-A0-D1:0] Legacy floppy [FLOPPY]
0x000B: [V025-A1-D0:0] TEAC CD-224E f/w:K.0A [CD]
0x000C: [V321-A3-D6:0] SEAGATE_DAT DAT72-052 [TAPE]
0x000D: [V371-A2-D0:0] PERC LD 0 RAID 5 rev: 521S [HDD]
0x000E: [V371-A2-D6:0] P/PV SCSI Backplane f/w:1.0 [CNTRL]
0x000F: [V371-A2-D6:0] PE/PV SCSI Backplane f/w:1.0 [CNTRL]
0x0019: [V025-A5-D2:0] DELL 0123 [REMOV]
0x001A: [V025-A5-D2:1] DELL VCD f/w:0133 [CD]

It seems that my tape device is configured properly, but when i submit
a backup job through sbcon i get the following error:
is as follows:

##################################################
########################
###########################
#SME-6.50:
#Job Name:
#The specified device or media does not exist. Rescan for devices
using
the Scan for New Devices option at the server console.

#QMAN-6.50:
#Could not execute job:
########################

Any advice?
I would appreciate your response.

Cheers,
lmello


--
lmello