Netware 6.0 SP5 server with 2 Adaptec SCSI Ultra160 cards in it. Hard drive is connected to one and the old tape drive is on the other. I use Novanet 9 as backup software.

I want to mount a second, larger tape drive in my main server and keep the older drive for legacy tape purposes.

NWaspi.cdm is loaded, after the Ultra160 drivers in the startup.ncf file. Because I am installing a second tape drive, do I need to load NWaspi.cdm a second time?

The load lines in my startup are as follows:

Load IDECD.CDM
Load SCSIHD.CDM
Load ADPT160M.HAM SLOT=3
Load ADPT160M.HAM SLOT=4
LOAD IDEATA.HAM PORT=1F0 INT E
LOAD IDEATA.HAM PORT=170 INT F
Load NWASPI.CDM

Any help would be appreciated, thank you.
Scott Schaffer

Scott Schaffer
ITSA
Olive Waller Zinkhan & Waller