I have Jumbo frames configured (9000bytes) on my Netware 6.5 SP3 servers
and my iSCSI targets (Falconstor boxes).

When I ping back and forth with 9000 byte packets I see the jumbo frames
counters increment in the Netware Monitor screen under the LAN card stats.

However, iSCSI doesn't seem to use them.

Is iSCSI hard coded to 1500 byte MTU ?

Is there any setting to change it ? (certainly not in NoRM).

Trolling the archives I see Tim Heywood says he set up a system with Jumbo
frames - hello Tim - was this Netware as a Initiator ???