mark@noemai.com wrote:

> I have a NetWare 6.5sp2 server and trying to connect to a LeftHand IP SAN.
> The SAN is on a separate storage network with a 192.168.222.0 address. The
> server can ping the target, but when I run iscsinit connect with the target
> address and initiator it just returns to the prompt and doesn't connect.
>
> Iscsi list shows all the correct settings and names according to TID
> 10091094. Any ideas what I could be missing? My SLES8 and Windows servers
> connect no problem.
>
>


for the volume on the SAN, make sure that the authentication group in
the LH management console has CHAP not required, and the *EXACT*
Initiator Node Name from the netware server, i.e.
iqn.1984-08.com.novell:.srvzzzzz etc.

then a iscsinit discover 192.168.222.0


should show the lefthand san.