Multi-Pathing is not working properly, failover never took place using the
O/S Multi-Pathing and the disks just got deactivated. So I am checking the
startup.ncf as one possible cause
(Netware 6.0 SP4 + Netware 6.5 SP2)

Here is the startup.ncf file

Load Keyb United Kingdom
Load Charset CP850
LOAD CPQMPK.PSM
######## End PSM Drivers ########
SET MULTI-PATH SUPPORT=ON
LOAD SCSIHD.CDM /AEN
LOAD CPQSHD.CDM
LOAD IDECD.CDM
######## End CDM Drivers ########
LOAD CPQRAID.HAM SLOT=10005
LOAD IDEATA.HAM SLOT=10010
LOAD QL2300.HAM SLOT=2 /LUNS /ALLPATHS /PORTNAMES /QUALIFIED
LOAD QL2300.HAM SLOT=3 /LUNS /ALLPATHS /PORTNAMES /QUALIFIED
######## End HAM Drivers ########

I have a few queries
Should CPQSHD.CDM have the -NONHPSAN option?

How do I set the SCSI Disk Timeout value, as I want to extend it to
possibly 180 seconds?

I have read the SCSIHD documentation and it is a bit unclear it says
Retries is 2, retrytimeout=10 but this does not really tell me how long
between when the first I/O is sent (?) and when the disk gets finally
deactivated!
Adrian