I would like to know if someone try the following configuration and if it works:
I've got one NW6.5SP2 with 1 hba card which is connected to a HP Fiber Channel Switch (2/8 V).
I've got 1 MSA1000 with 2 controllers which I would like to connect to my switch.

Then I would do a zoning so my NW6.5 could see the 2 controllers and I would like to use NW6.5 multipath .

The goal is to get a redundacy for the controllers...so if a controller is down the NW6.5 can see the MSA1000 through the other controller.