I have two QLogic 2310F HBAs in a Dell PE2650 running NW65 sp5. I've
loaded the drivers for the HBAs in startup.ncf as follows:

SET MULTI-PATH SUPPORT = ON
LOAD 23X00.HAM SLOT=2 /LUNS /MAXLUNS=255 /ALLPATHS /PATHNAMES /CONSOLE
LOAD 23X00.HAM SLOT=3 /LUNS /MAXLUNS=255 /ALLPATHS /PATHNAMES /CONSOLE

With the above parameters, the drivers make both paths visible to Netware
and the Multi-Path support deal with failover. This part works fine.
However I noticed that in NSSMU under Devices, when I select the Sun 6920
Fibre Channel Array connected to the other end of the HBAs(through a pair
of QLogic switches), it shows an option at the bottom F4=Multi Path. If I
press F4, I get a screen that shows me the failover status of the HBAs.
There is a item on the screen that indicates "Loadbalance:no". It seems
like one of the other settable options, but there seems to be no way to
turn this on.

How can I enable loadbalancing between the two HBAs?

Thanks,

John K.
Kwantlen University College
Surrey, BC Canada