We have a cluster based on two DL380 G2s and an attached SCSI RAID box
(origially sold as a "cluster in a box" by Compaq). The RAID originally had
three 36 GB drives configured as a RAID 5. Later another drive was added.
Even later, we added two 146 GB drives, reasoning that we would eventually
replace the 36 GB drives with 146 GB drives and expand the capacity of the

When I added the first two 146 GB drives, I had to create a second logical
drive and add that to the RAID (I'm working partly from memory here). At
any rate, CPQONLIN.NLM