Hi All,

This might not be the appropriate place to ask this question but I
thought I would give it a try. I am running a HP Proliant ML370 G2 with a
HP Smart Array 5300 controller. There are two hardware based arrays on
this controller. Both consist of three HP 72GB hot swap able drives.
Everything has the latest firmware installed. The OS is Netware 6.0 SP5.
One of the drives failed and I swaped a new drive in. The Array begins to
rebuild. After a few minutes, it stops rebuilding and CPQONLIN.NLM shows
it as queued. Does anyone have any idea why it will not complete the
rebuild? Is there a way to force it to rebuild? Thanks