Hi

Totally new to NetWare. A friend is running NetWare 6 - SBS, I think.
There's a server with IDE disks running BorderManager and GroupWise.
Terrible, repeated electricity failure resulted in the server not booting
up properly.

After some googling, found that the nsspool sys has not been activated.
Checked the status and nss reports

Pool Name : CACHED : ACTIVE
Pool Name : SYS : INACTIVE

I issued nss /poolactivate=SYS and got the error 20444 zERR_ZID_NOT_FOUND

Don't know what this means.

Found a thread with a command nss /poolrebuild=sys.

Is this the correct command to give?

Please help

Thanks a bunch

Best wishes

Iyer