I'm running a NetWare 6.5sp4 network with 3 servers and roughly 500 clients. I have one, yes one, machine that will absolutely not see the tree. It's a WinXP sp2 laptop with the firewall turned off and Client 4.91 sp2. It can surf the internet, it can ping the server, it can even print with iPrint. Everything looks the same in the client properties.

Again, SLP is running, all of the other clients see and connect fine to the servers. I'm completely out of ideas, short of blowing away the computer and starting from scratch.

Here is the slpinfo

************************************************** ***
*** Novell Client for Windows NT ***
*** Service Location Diagnostics ***
************************************************** ***

SLP Version: 4.91.0.1
SLP Start Time: 3:41:27pm 1/17/2006
Last I/O: 4:03:26pm 1/17/2006
Total Packets: Out: 161 In: 4
Total Bytes: Out: 8050 In: 260


SLP Operational Parameters Values
------------------------------- ------------
Static Scopes NO
Static Directory Agents NO
Active Discovery YES
Use Broadcast for SLP Multicast NO
Use DHCP for SLP YES
SLP Maximum Transmission Unit 1400 bytes
SLP Multicast Radius 32 hops


SLP Timers Values
------------------------------------- ------------
Give Up on Requests to SAs 15 seconds
Close Idle TCP Connections 5 minutes
Cache SLP Replies 1 minutes
SLP Default Registration Lifetime 10800 seconds
Wait Before Giving Up on DA 5 seconds
Wait Before Registering on Passive DA 1-2 seconds


Scope List Source(s)
---------------------------------------- ------------
<unscoped>


DA IP Address Source(s) State Version Local Interface Scope(s)
--------------- --------- ----- ------- --------------- ---------------

<No Directory Agents>



Local Interface 10.10.2.34
---------------------------------
Operational State: UP
Operating Mode(s): MCAST
SA/UA Scopes: <unscoped>
Last I/O: 4:03:26pm 1/17/2006
Total Packets: Out: 161 In: 4
Total Bytes: Out: 8050 In: 260
Last Addr Out: 224.0.1.22
Last Addr In: 10.10.10.34